FCSM: user1> show log options | Intel SBCEFCSW specification

The following is an example of the Show Log Options command.

FCSM: user1> show log options

Allowed options for ' level': Critical,Warn,Info,None

Allowed options for 'component': All,None,NameServer,MgmtServer,Zoning,Switch,Chassis,Blade,Port,Eport,Snmp,Other

Current setting(s) for log port: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

The following is an example of the Show Log command.

[327][Wed Jan 25 09:36:54.860 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Eport State = E_A0_GET_DOMAIN_ID]

[328][Wed Jan 25 09:36:54.860 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][FSPF PortUp state=0]

[329][Wed Jan 25 09:36:54.861 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Send ing init hello]

[330][Wed Jan 25 09:36:54.861 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Proc essing EFP, oxid= 0x8]

[331][Wed Jan 25 09:36:54.861 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Eport State = E_A2_IDLE]

[332][Wed Jan 25 09:36:54.861 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][EFP, WWN= 0x100000c0dd00b845, len= 0x30]

[333][Wed Jan 25 09:36:54.864 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Sending

LSU oxid= 0xc: type= 1]

[334][Wed Jan 25 09:36:54.864 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Send Zone Merge Request]

[335][Wed Jan 25 09:36:54.865 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][LSDB Xchg timer set]

[336][Wed Jan 25 09:36:54.865 1989][I][Eport:0xdd00b8b6.304.4 Port: 0/8][Setting attribute Oper.UserPort.0.8.EpConnState Connected]

53

Image 67

Intel SBCEFCSW manual FCSM: user1> show log options

Contents

SBCEFCSW Management and User’s Guide Intel Blade Server Switch ModuleOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General Safety Handling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimers Electromagnetic compatibility notice USA Electromagnetic compatibility EMC RRL Korea Japan EMC Compatibility English translation of the previous notice xiiiPage Related publications 1 Introduction •QLogic SAN Configuration Guide: LSI Storage QLogic SAN Solutions Guide•QLogic Switch Interoperability Guide •QLogic SAN Configuration Guide: CLARiiON Storage Notices used in this book Page Logging on to a switch 2 Command line interface CLI Commands Command syntaxcommand Admin session commands Table 1. Commands listed by authority levelUser authority commands Admin authority command Authority Admin commandadmin cancel copy alias_source alias_destination Alias commandalias add alias members rename alias old alias new remove alias members backup Config commandconfig activate config FCSM admin-config :user1> config cancel save configFCSM: user1> admin start FCSM admin : user1> config edit Authority Date commanddate MMDDhhmmCCYY Syntax Fallback commandfallback Authority keyword Help commandcommand help FCSM: user1> help set beacon set beacon On | Off Syntax History commandhistory Authority unpack file Image commandcleanup image Syntax Lip command for external ports onlyport number Authority Authority Passwd commandpasswd account_name Examples Ps commandAuthority Syntax Syntax Quit commandquit, exit, or logout Authority switch Reset commandreset config config name External port 0,15 default Table 2. Switch configuration defaultsTable 3. Port configuration defaults Default Internal port 1-14default Table 3. Port configuration defaults continuedTable 4. Threshold configuration defaults External port 0,15 default Default Table 5. SNMP configuration defaultsTable 6. System configuration defaults Default setup option Set commandalarm clear config option Offline switch stateDiagnostics Online ports port number Set Config commandset config port port number Parameter switchTable 7. Set Config port parameters continued Table 8. Set Config switch parameters zoning thresholdTable 8. Set Config switch parameters continued Table 9. Set Config threshold parameters Examples Table 10. Set Config zoning parametersOn or to RAM volatile Off. The default is On Default FCSM user1 admin start LoginMonitoringEnabled clear Set Log commandset log archive Zoning SwitchOther Port bypass alpa Set Port commandenable alpa set port port number Disables the port DownDiagnostics Prepares the port for testing Authority Set Setup commandset setup Table 11. SNMP configuration settings Examples Table 12. System configuration settings Trap2Address about Show commandalarm show interface domainsdonor fabric Entry Table 13. Show Port parametersDescription setup option post logsteering domain_id support switch topologyusers version FCSM: user1> show topology Class2FramesIn Authority Show Config commandshow config switch MFS TOV MSEnable True NoClose False Configuration Name: default LogoutMonitoringEnabled True RisingTrigger5LOSMonitoringEnabledTrue RisingTrigger100 FCSM: user1> show config zoning component Show Log commandsettings show log FCSM: user1> show log options byte Show Perf commanderrors port_number show perf FCSM: user1>: show perf Examples Syntax Show Setup commandshow setup Authority FCSM: user1> show setup snmp Syntax Shutdown commandshutdown Authority Internal for internal and external ports Test commandtest port port_number test_type test x external Syntax Uptime commanduptime Authority delete account_name User commanduser accounts admin@OB-session2 user1@OB-session3 FCSM admin user1 user del user3FCSM admin : user1> user list admin@OB-session1- in admin mode Syntax Whoami commandwhoami Authority copy zone_source zone_destination Zone commandzone add zone members type zone zone_type members zoneremove zone members rename zone old zone new wwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 active Zoneset commandzoneset activate zone_set Notes remove zone_set zone_listrename zone_set_old zone_set_new zones zone_set cancel Zoning commandedit limits save Examples 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 wwn wwn_b0241f 50:06:04:82:bf:d2:18:c250:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn_23bd31 50:06:04:82:bf:d2:18:c2 SAN Utility user interface 3 Using the SAN Utility Figure 2. Faceplate window Figure 1. Topology window Figure 3. Menu bar selection examples Menu barTable 14. Menu shortcut keys Toolbar button name ToolbarTable 15. Toolbar buttons Toolbar button Figure 4. Fabric tree Fabric treeGraphic window Data window and tabs Working status indicator Using the Topology windowFigure 5. Topology window Status Fibre Channel switch module and link statusWorking with switch modules and links Switch module icon color Selecting switch modules and links Arranging switch modules in the window Topology data window tabs Using the Faceplate windowFigure 7. Faceplate window Selecting ports Opening the Faceplate window and pop-upmenusPort views and status Working with ports Opening pop-upmenus Setting up securityManaging fabrics Faceplate data window tabs 5.Click Add fabric Managing the fabric databaseAdding a fabric Removing a fabric Rediscovering a fabric Adding a new switch module to a fabricOpening a fabric view file Saving a fabric view file Displaying fabric information Replacing a failed switch module in a fabric4.Click Switch / Restore 2.Click Switch / Delete Description Switch module icon Active Zoneset Data window Zoning a fabricFigure 9. Active Zonesets window Soft zoning Zoning conceptsAccess control list zones Zones Zoning database Zoning configurationAliases Zone sets Zone merge failure Using the Zoning Config windowRestoring default zoning Merging fabrics and zoning Zone merge failure recovery Using the Edit Zoning windowFigure 11. Edit Zoning window Table 18. Edit Zoning window toolbar buttons Managing zone sets Activating and deactivating a zone set Creating a zone setCopying a zone to a zone set Creating a zone in a zone set Managing zonesRemoving a zone set Removing all zoning definitions Removing a zone from a zone set Adding zone membersRenaming a zone or a zone set Removing a zone member Creating an alias Managing aliasesRemoving a zone from all zone sets Changing zone types Adding a member to an alias Managing switch modulesRemoving an alias from all zones Figure 12. Faceplate data window Displaying switch module informationName Server data window •Click View ” Refresh Entry Switch Data windowTable 20. Switch data window entries Table 19. Name server data window entries Description Link data windowTable 20. Switch data window entries continued Entry Port Information Data window Configured Zonesets Data windowFabric view port graphing application Port Statistics Data window Alarm Log Data window Managing alarmsConfiguring alarms Exporting alarm log information to a file Paging a switch moduleSetting the date and time Resetting a switch module Table 21. Switch module administrative states Configuring a switch moduleSwitch module properties Figure 15. Switch Properties window Broadcast support Domain ID and Domain ID LockIn-bandmanagement Figure 16. Network Properties window Timeout valuesNetwork properties Table 22. Timeout values Table 23. IP configuration parameters Archiving a switch moduleIP configuration Remote logging Activating the fallback firmware Managing portsManaging firmware Loading firmware Table 24. Port mode descriptions Displaying port informationMonitoring port status Figure 17. Faceplate Display Data window Table 25. Port operational states Displaying port operational statesDisplaying port speeds Table 24. Port mode descriptions continued Table 27. SFP module media view Port graphing and Fabric View applicationPort Statistics Data window Displaying SFP module media status Description EntryTotal LIP received Table 29. Port Information Data window entries Port Information data window Name Server Data window Configuring portsFigure 18. External Port Properties window 2.Click Port / Port Properties Changing port administrative statesFigure 19. Internal Port Properties window 2.Click Port / Port Properties Changing port speeds external ports onlyChanging port modes external ports only Table 30. Port administrative states Table 32. Port modes continued I/O stream guardExtending port credits 2.Click Port / Port Properties Figure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a port LED diagnostics 4 Switch management utility functions Internal firmware failure LED flash pattern Fatal error LED flash patternHeartbeat LED patterns Normal all pass LED flash pattern Port logged-inLED flash patterns Switch module fault LED flash patternSwitch module OK LED Configuration file system error LED flash pattern Port fault LED flash patterns Port testingTable 33. E-portisolation causes and fixes SNMP configuration Fibre Channel switch module monitoring using SNMPFigure 22. Port Loopback Test window Parameter SNMP trap configurationTable 34. SNMP configuration parameters Table 35. SNMP trap configuration parameters Table 36. Factory default configuration settings Configuration backupConfiguration restore Restoring the factory default configuration Reinitializing the configuration file system Using the Fabric View applicationRestoring a switch module Figure 23. Fabric View graphs Starting the Fabric View applicationDisplaying port performance graphs Arranging and sizing port performance graphs Figure 24. Modify Graph Display window Customizing port performance graphs Port mapping AMapping port locations and software numberingTable 37. Port mapping Page Before you call Using the documentationHardware/Software service and support B Getting help and technical assistancePage Important notes C Notices Electromagnetic Compatibility EMC Regulatory Specifications and DisclaimersSafety Compliance Declaration of the Manufacturer or Importer Index Page Page Page