Manuals / Intel / Home Audio / Stereo Receiver

Intel SBCEFCSW manual C Notices, Important notes

Models: SBCEFCSW

1 156

Download 156 pages 18.47 Kb

Page 149

C Notices

Important notes

Processor speeds indicate the internal clock speed of the microprocessor; other factors also affect application performance.

CD-ROM drive speeds list the variable read rate. Actual speeds vary and are often less than the maximum possible.

When referring to processor storage, real and virtual storage, or channel volume, KB stands for approximately 1000 bytes, MB stands for approximately 1 000 000 bytes, and GB stands for approximately 1 000 000 000 bytes.

When referring to hard disk drive capacity or communications volume, MB stands for 1000000 bytes, and GB stands for 1000 000 000 bytes. Total user-accessible capacity may vary depending on operating environments.

Maximum internal hard disk drive capacities assume the replacement of any standard hard disk drives and population of all hard disk drive bays with the largest currently supported drives available from .

Maximum memory may require replacement of the standard memory with an optional memory module.

Intel Corporation makes no representations or warranties with respect to non- products. Support (if any) for the non- products is provided by the third party, not by Intel.

Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

135

Image 149

Intel SBCEFCSW manual C Notices, Important notes

Contents

Order Number C39671-003 Intel Blade Server Switch ModuleSBCEFCSW Management and User’s Guide Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notice USA Electromagnetic compatibility EMCRRL Korea Japan EMC CompatibilityEnglish translation of the previous notice xiiiPage Related publications 1 Introduction•QLogic Switch Interoperability Guide QLogic SAN Solutions Guide•QLogic SAN Configuration Guide: CLARiiON Storage •QLogic SAN Configuration Guide: LSI StorageNotices used in this book Page Logging on to a switch 2 Command line interface CLIcommand Command syntaxCommands User authority commands Table 1. Commands listed by authority levelAdmin authority command Admin session commandsadmin Admin commandcancel Authorityalias Alias commandadd alias members copy alias_source alias_destinationrename alias old alias new remove alias membersconfig Config commandactivate config backupFCSM: user1> admin start save configFCSM admin : user1> config edit FCSM admin-config :user1> config canceldate Date commandMMDDhhmmCCYY Authorityfallback Fallback commandAuthority Syntaxcommand Help commandhelp keywordFCSM: user1> help set beacon set beacon On | Off history History commandAuthority Syntaxcleanup Image commandimage unpack fileport number Lip command for external ports onlyAuthority Syntaxpasswd Passwd commandaccount_name AuthorityAuthority Ps commandSyntax Examplesquit, exit, or logout Quit commandAuthority Syntaxreset Reset commandconfig config name switchTable 3. Port configuration defaults Table 2. Switch configuration defaultsDefault External port 0,15 defaultTable 4. Threshold configuration defaults Table 3. Port configuration defaults continuedExternal port 0,15 default Internal port 1-14defaultTable 6. System configuration defaults Table 5. SNMP configuration defaultsDefault Defaultalarm clear Set commandconfig option setup optionDiagnostics switch stateOnline Offlineset config Set Config commandport port number ports port numberTable 7. Set Config port parameters continued switchTable 8. Set Config switch parameters ParameterTable 8. Set Config switch parameters continued thresholdTable 9. Set Config threshold parameters zoningOn or to RAM volatile Off. The default is On Table 10. Set Config zoning parametersDefault ExamplesFCSM user1 admin start LoginMonitoringEnabled set log Set Log commandarchive clearOther SwitchPort Zoningenable alpa Set Port commandset port port_number bypass alpaDiagnostics DownPrepares the port for testing Disables the portset setup Set Setup commandTable 11. SNMP configuration settings AuthorityExamples Table 12. System configuration settingsTrap2Address alarm Show commandshow aboutdonor domainsfabric interfaceDescription Table 13. Show Port parametersEntry steering domain_id post logsupport setup optionusers topologyversion switchFCSM: user1> show topology Class2FramesIn show config Show Config commandswitch AuthorityMFS TOV MSEnable True NoClose False LOSMonitoringEnabledTrue RisingTrigger100 LogoutMonitoringEnabled True RisingTrigger5FCSM: user1> show config zoning Configuration Name: defaultsettings Show Log commandshow log componentFCSM: user1> show log options errors port_number Show Perf commandshow perf byteFCSM: user1>: show perf Examplesshow setup Show Setup commandAuthority SyntaxFCSM: user1> show setup snmp shutdown Shutdown commandAuthority Syntaxtest Test commandport port_number test_type Internal for internal and external portstest x external uptime Uptime commandAuthority Syntaxuser User commandaccounts delete account_nameFCSM admin : user1> user list FCSM admin user1 user del user3admin@OB-session1- in admin mode admin@OB-session2 user1@OB-session3whoami Whoami commandAuthority Syntaxzone Zone commandadd zone members copy zone_source zone_destinationremove zone members members zonerename zone old zone new type zone zone_typewwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 zoneset Zoneset commandactivate zone_set activerename zone_set_old zone_set_new remove zone_set zone_listzones zone_set Notesedit Zoning commandlimits cancelsave Examples50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn wwn_b0241f 50:06:04:82:bf:d2:18:c2wwn_23bd31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31SAN Utility user interface 3 Using the SAN UtilityFigure 2. Faceplate window Figure 1. Topology windowTable 14. Menu shortcut keys Menu barFigure 3. Menu bar selection examples Table 15. Toolbar buttons ToolbarToolbar button Toolbar button nameGraphic window Fabric treeData window and tabs Figure 4. Fabric treeFigure 5. Topology window Using the Topology windowWorking status indicator Working with switch modules and links Fibre Channel switch module and link statusSwitch module icon color StatusSelecting switch modules and links Arranging switch modules in the windowFigure 7. Faceplate window Using the Faceplate windowTopology data window tabs Port views and status Opening the Faceplate window and pop-upmenusWorking with ports Selecting portsManaging fabrics Setting up securityFaceplate data window tabs Opening pop-upmenusAdding a fabric Managing the fabric databaseRemoving a fabric 5.Click Add fabricOpening a fabric view file Adding a new switch module to a fabricSaving a fabric view file Rediscovering a fabric4.Click Switch / Restore Replacing a failed switch module in a fabric2.Click Switch / Delete Displaying fabric informationDescription Switch module iconFigure 9. Active Zonesets window Zoning a fabricActive Zoneset Data window Access control list zones Zoning conceptsZones Soft zoningAliases Zoning configurationZone sets Zoning databaseRestoring default zoning Using the Zoning Config windowMerging fabrics and zoning Zone merge failureFigure 11. Edit Zoning window Using the Edit Zoning windowZone merge failure recovery Table 18. Edit Zoning window toolbar buttons Managing zone setsCopying a zone to a zone set Creating a zone setActivating and deactivating a zone set Removing a zone set Managing zonesRemoving all zoning definitions Creating a zone in a zone setRenaming a zone or a zone set Adding zone membersRemoving a zone member Removing a zone from a zone setRemoving a zone from all zone sets Managing aliasesChanging zone types Creating an aliasRemoving an alias from all zones Managing switch modulesAdding a member to an alias Name Server data window Displaying switch module information•Click View ” Refresh Figure 12. Faceplate data windowTable 20. Switch data window entries Switch Data windowTable 19. Name server data window entries EntryTable 20. Switch data window entries continued Link data windowEntry DescriptionFabric view port graphing application Configured Zonesets Data windowPort Statistics Data window Port Information Data windowConfiguring alarms Managing alarmsAlarm Log Data window Setting the date and time Paging a switch moduleResetting a switch module Exporting alarm log information to a fileSwitch module properties Configuring a switch moduleFigure 15. Switch Properties window Table 21. Switch module administrative statesIn-bandmanagement Domain ID and Domain ID LockBroadcast support Network properties Timeout valuesTable 22. Timeout values Figure 16. Network Properties windowIP configuration Archiving a switch moduleRemote logging Table 23. IP configuration parametersManaging firmware Managing portsLoading firmware Activating the fallback firmwareMonitoring port status Displaying port informationFigure 17. Faceplate Display Data window Table 24. Port mode descriptionsDisplaying port speeds Displaying port operational statesTable 24. Port mode descriptions continued Table 25. Port operational statesPort Statistics Data window Port graphing and Fabric View applicationDisplaying SFP module media status Table 27. SFP module media viewTotal LIP received EntryDescription Table 29. Port Information Data window entries Port Information data windowFigure 18. External Port Properties window Configuring portsName Server Data window Figure 19. Internal Port Properties window Changing port administrative states2.Click Port / Port Properties Changing port modes external ports only Changing port speeds external ports onlyTable 30. Port administrative states 2.Click Port / Port PropertiesExtending port credits I/O stream guard2.Click Port / Port Properties Table 32. Port modes continuedFigure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a portLED diagnostics 4 Switch management utility functionsHeartbeat LED patterns Fatal error LED flash patternNormal all pass LED flash pattern Internal firmware failure LED flash patternSwitch module OK LED Switch module fault LED flash patternConfiguration file system error LED flash pattern Port logged-inLED flash patternsTable 33. E-portisolation causes and fixes Port testingPort fault LED flash patterns Figure 22. Port Loopback Test window Fibre Channel switch module monitoring using SNMPSNMP configuration Table 34. SNMP configuration parameters SNMP trap configurationTable 35. SNMP trap configuration parameters ParameterConfiguration restore Configuration backupRestoring the factory default configuration Table 36. Factory default configuration settingsRestoring a switch module Using the Fabric View applicationReinitializing the configuration file system Displaying port performance graphs Starting the Fabric View applicationArranging and sizing port performance graphs Figure 23. Fabric View graphsFigure 24. Modify Graph Display window Customizing port performance graphsTable 37. Port mapping AMapping port locations and software numberingPort mapping Page Hardware/Software service and support Using the documentationB Getting help and technical assistance Before you callPage Important notes C NoticesSafety Compliance Regulatory Specifications and DisclaimersDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMCIndex Page Page Page