Set command, Alarm clear, Beacon state, Log option | Intel SBCEFCSW

Set command

Sets a variety of port and switch parameters.

Authority

Admin for all keywords except Alarm Clear, Beacon, and Pagebreak which are available with User authority.

Syntax

set

alarm clear

beacon [state]

config [option]

log [option]

pagebreak [state]

port [option]

setup [option]

switch [state]

Keywords

alarm clear

Clears the alarm log. This keyword is available with User authority.

beacon [state]

Enables or disables the flashing of the Port Logged-in LEDs according to [state]. This keyword is available with User authority. [state] can be one of the following:

On

Enables the flashing beacon.

Off

Disables the flashing beacon.

config [option]

Sets port, switch, alarm threshold, and zoning configuration parameters. See the “Set Config command” on page 29.

log [option]

Specifies the type of entries to be entered in the event log. See the “Set Log command” on page 35.

pagebreak [state]

Specifies how much information is displayed on the screen at a time according to the value given by [state]. This keyword is available with User authority. [state] can be one of the following:

On

Limits the display of information to 20 lines at a time.

Off

Allows continuous display of information without a break.

port [option]

Sets port state and speed for the specified port temporarily until the next switch reset or new configuration activation. See the “Set Port command” on page 37.

setup [option]

Changes SNMP and blade server configuration settings. See the “Set Setup command” on page 39.

27

Image 41

Intel SBCEFCSW Set command, alarm clear, beacon state, config option, log option, pagebreak state, port option, Authority

Contents

Order Number C39671-003 Intel Blade Server Switch ModuleSBCEFCSW Management and User’s Guide Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General Safety Handling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimers Electromagnetic compatibility notice USA Electromagnetic compatibility EMC RRL Korea Japan EMC Compatibility English translation of the previous notice xiiiPage Related publications 1 Introduction •QLogic Switch Interoperability Guide QLogic SAN Solutions Guide•QLogic SAN Configuration Guide: CLARiiON Storage •QLogic SAN Configuration Guide: LSI Storage Notices used in this book Page Logging on to a switch 2 Command line interface CLI command Command syntaxCommands User authority commands Table 1. Commands listed by authority levelAdmin authority command Admin session commands admin Admin commandcancel Authority alias Alias commandadd alias members copy alias_source alias_destination rename alias old alias new remove alias members config Config commandactivate config backup FCSM: user1> admin start save configFCSM admin : user1> config edit FCSM admin-config :user1> config cancel date Date commandMMDDhhmmCCYY Authority fallback Fallback commandAuthority Syntax command Help commandhelp keyword FCSM: user1> help set beacon set beacon On | Off history History commandAuthority Syntax cleanup Image commandimage unpack file port number Lip command for external ports onlyAuthority Syntax passwd Passwd commandaccount_name Authority Authority Ps commandSyntax Examples quit, exit, or logout Quit commandAuthority Syntax reset Reset commandconfig config name switch Table 3. Port configuration defaults Table 2. Switch configuration defaultsDefault External port 0,15 default Table 4. Threshold configuration defaults Table 3. Port configuration defaults continuedExternal port 0,15 default Internal port 1-14default Table 6. System configuration defaults Table 5. SNMP configuration defaultsDefault Default alarm clear Set commandconfig option setup option Diagnostics switch stateOnline Offline set config Set Config commandport port number ports port number Table 7. Set Config port parameters continued switchTable 8. Set Config switch parameters Parameter Table 8. Set Config switch parameters continued thresholdTable 9. Set Config threshold parameters zoning On or to RAM volatile Off. The default is On Table 10. Set Config zoning parametersDefault Examples FCSM user1 admin start LoginMonitoringEnabled set log Set Log commandarchive clear Other SwitchPort Zoning enable alpa Set Port commandset port port number bypass alpa Diagnostics DownPrepares the port for testing Disables the port set setup Set Setup commandTable 11. SNMP configuration settings Authority Examples Table 12. System configuration settings Trap2Address alarm Show commandshow about donor domainsfabric interface Description Table 13. Show Port parametersEntry steering domain_id post logsupport setup option users topologyversion switch FCSM: user1> show topology Class2FramesIn show config Show Config commandswitch Authority MFS TOV MSEnable True NoClose False LOSMonitoringEnabledTrue RisingTrigger100 LogoutMonitoringEnabled True RisingTrigger5FCSM: user1> show config zoning Configuration Name: default settings Show Log commandshow log component FCSM: user1> show log options errors port_number Show Perf commandshow perf byte FCSM: user1>: show perf Examples show setup Show Setup commandAuthority Syntax FCSM: user1> show setup snmp shutdown Shutdown commandAuthority Syntax test Test commandport port_number test_type Internal for internal and external ports test x external uptime Uptime commandAuthority Syntax user User commandaccounts delete account_name FCSM admin : user1> user list FCSM admin user1 user del user3admin@OB-session1- in admin mode admin@OB-session2 user1@OB-session3 whoami Whoami commandAuthority Syntax zone Zone commandadd zone members copy zone_source zone_destination remove zone members members zonerename zone old zone new type zone zone_type wwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 zoneset Zoneset commandactivate zone_set active rename zone_set_old zone_set_new remove zone_set zone_listzones zone_set Notes edit Zoning commandlimits cancel save Examples 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn wwn_b0241f 50:06:04:82:bf:d2:18:c2wwn_23bd31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 SAN Utility user interface 3 Using the SAN Utility Figure 2. Faceplate window Figure 1. Topology window Table 14. Menu shortcut keys Menu barFigure 3. Menu bar selection examples Table 15. Toolbar buttons ToolbarToolbar button Toolbar button name Graphic window Fabric treeData window and tabs Figure 4. Fabric tree Figure 5. Topology window Using the Topology windowWorking status indicator Working with switch modules and links Fibre Channel switch module and link statusSwitch module icon color Status Selecting switch modules and links Arranging switch modules in the window Figure 7. Faceplate window Using the Faceplate windowTopology data window tabs Port views and status Opening the Faceplate window and pop-upmenusWorking with ports Selecting ports Managing fabrics Setting up securityFaceplate data window tabs Opening pop-upmenus Adding a fabric Managing the fabric databaseRemoving a fabric 5.Click Add fabric Opening a fabric view file Adding a new switch module to a fabricSaving a fabric view file Rediscovering a fabric 4.Click Switch / Restore Replacing a failed switch module in a fabric2.Click Switch / Delete Displaying fabric information Description Switch module icon Figure 9. Active Zonesets window Zoning a fabricActive Zoneset Data window Access control list zones Zoning conceptsZones Soft zoning Aliases Zoning configurationZone sets Zoning database Restoring default zoning Using the Zoning Config windowMerging fabrics and zoning Zone merge failure Figure 11. Edit Zoning window Using the Edit Zoning windowZone merge failure recovery Table 18. Edit Zoning window toolbar buttons Managing zone sets Copying a zone to a zone set Creating a zone setActivating and deactivating a zone set Removing a zone set Managing zonesRemoving all zoning definitions Creating a zone in a zone set Renaming a zone or a zone set Adding zone membersRemoving a zone member Removing a zone from a zone set Removing a zone from all zone sets Managing aliasesChanging zone types Creating an alias Removing an alias from all zones Managing switch modulesAdding a member to an alias Name Server data window Displaying switch module information•Click View ” Refresh Figure 12. Faceplate data window Table 20. Switch data window entries Switch Data windowTable 19. Name server data window entries Entry Table 20. Switch data window entries continued Link data windowEntry Description Fabric view port graphing application Configured Zonesets Data windowPort Statistics Data window Port Information Data window Configuring alarms Managing alarmsAlarm Log Data window Setting the date and time Paging a switch moduleResetting a switch module Exporting alarm log information to a file Switch module properties Configuring a switch moduleFigure 15. Switch Properties window Table 21. Switch module administrative states In-bandmanagement Domain ID and Domain ID LockBroadcast support Network properties Timeout valuesTable 22. Timeout values Figure 16. Network Properties window IP configuration Archiving a switch moduleRemote logging Table 23. IP configuration parameters Managing firmware Managing portsLoading firmware Activating the fallback firmware Monitoring port status Displaying port informationFigure 17. Faceplate Display Data window Table 24. Port mode descriptions Displaying port speeds Displaying port operational statesTable 24. Port mode descriptions continued Table 25. Port operational states Port Statistics Data window Port graphing and Fabric View applicationDisplaying SFP module media status Table 27. SFP module media view Total LIP received EntryDescription Table 29. Port Information Data window entries Port Information data window Figure 18. External Port Properties window Configuring portsName Server Data window Figure 19. Internal Port Properties window Changing port administrative states2.Click Port / Port Properties Changing port modes external ports only Changing port speeds external ports onlyTable 30. Port administrative states 2.Click Port / Port Properties Extending port credits I/O stream guard2.Click Port / Port Properties Table 32. Port modes continued Figure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a port LED diagnostics 4 Switch management utility functions Heartbeat LED patterns Fatal error LED flash patternNormal all pass LED flash pattern Internal firmware failure LED flash pattern Switch module OK LED Switch module fault LED flash patternConfiguration file system error LED flash pattern Port logged-inLED flash patterns Table 33. E-portisolation causes and fixes Port testingPort fault LED flash patterns Figure 22. Port Loopback Test window Fibre Channel switch module monitoring using SNMPSNMP configuration Table 34. SNMP configuration parameters SNMP trap configurationTable 35. SNMP trap configuration parameters Parameter Configuration restore Configuration backupRestoring the factory default configuration Table 36. Factory default configuration settings Restoring a switch module Using the Fabric View applicationReinitializing the configuration file system Displaying port performance graphs Starting the Fabric View applicationArranging and sizing port performance graphs Figure 23. Fabric View graphs Figure 24. Modify Graph Display window Customizing port performance graphs Table 37. Port mapping AMapping port locations and software numberingPort mapping Page Hardware/Software service and support Using the documentationB Getting help and technical assistance Before you callPage Important notes C Notices Safety Compliance Regulatory Specifications and DisclaimersDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMC Index Page Page Page