FCSM user1 admin start | Intel SBCEFCSW specification

FCSM: user1> admin start
FCSM (admin) : user1> config		edit
FCSM (admin-config)	: user1>	set config switch
A list of attributes with formatting and current values will follow.
Enter a new value	or simply press		the ENTER key to accept the		current value.
If you wish to terminate this process before reaching the end					of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState	(1=Online, 2=Offline, 3=Diagnostics)			[Online]
BroadcastEnabled	(True / False)			[True]
InbandEnabled	(True / False)			[True]
DefaultDomainID	(decimal	value,	1-239)	[1]
DomainIDLock	(True / False)			[False]
SymbolicName	(string,max=32 chars)			[Fibre Channel Switch
Module]
R_T_TOV	(decimal	value,	1-1000 msec)	[100]
R_A_TOV	(decimal	value,	100-100000 msec)	[10000]
E_D_TOV	(decimal	value,	10-20000 msec)	[2000]
FS_TOV	(decimal	value,	100-100000 msec)	[5000]
DS_TOV	(decimal	value,	100-100000 msec)	[5000]
PrincipalPriority	(decimal	value,	1-255)	[254]

ConfigDescription (string, max=64 chars)	[Fibre Channel Switch
Module]
Finished configuring attributes.

This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command.

The following is an example of the Set Config Threshold command.

FCSM (admin-config) : user1> set config threshold

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the			list
press 'q' or 'Q' and the ENTER key to do so.
ThresholdMonitoringEnabled	(True / False)	[False]
CRCErrorsMonitoringEnabled	(True / False)	[False]
RisingTrigger	(decimal value, 1-1000)	[25	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
DecodeErrorsMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[200	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
ISLMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[2	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]

33

Image 47

Intel SBCEFCSW manual FCSM user1 admin start

Contents

Order Number C39671-003 Intel Blade Server Switch ModuleSBCEFCSW Management and User’s Guide Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General Safety Handling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimers Electromagnetic compatibility notice USA Electromagnetic compatibility EMC RRL Korea Japan EMC Compatibility English translation of the previous notice xiiiPage Related publications 1 Introduction •QLogic SAN Configuration Guide: LSI Storage QLogic SAN Solutions Guide•QLogic Switch Interoperability Guide •QLogic SAN Configuration Guide: CLARiiON Storage Notices used in this book Page Logging on to a switch 2 Command line interface CLI command Command syntaxCommands Admin session commands Table 1. Commands listed by authority levelUser authority commands Admin authority command Authority Admin commandadmin cancel copy alias_source alias_destination Alias commandalias add alias members rename alias old alias new remove alias members backup Config commandconfig activate config FCSM admin-config :user1> config cancel save configFCSM: user1> admin start FCSM admin : user1> config edit Authority Date commanddate MMDDhhmmCCYY Syntax Fallback commandfallback Authority keyword Help commandcommand help FCSM: user1> help set beacon set beacon On | Off Syntax History commandhistory Authority unpack file Image commandcleanup image Syntax Lip command for external ports onlyport number Authority Authority Passwd commandpasswd account_name Examples Ps commandAuthority Syntax Syntax Quit commandquit, exit, or logout Authority switch Reset commandreset config config name External port 0,15 default Table 2. Switch configuration defaultsTable 3. Port configuration defaults Default Internal port 1-14default Table 3. Port configuration defaults continuedTable 4. Threshold configuration defaults External port 0,15 default Default Table 5. SNMP configuration defaultsTable 6. System configuration defaults Default setup option Set commandalarm clear config option Offline switch stateDiagnostics Online ports port number Set Config commandset config port port number Parameter switchTable 7. Set Config port parameters continued Table 8. Set Config switch parameters zoning thresholdTable 8. Set Config switch parameters continued Table 9. Set Config threshold parameters Examples Table 10. Set Config zoning parametersOn or to RAM volatile Off. The default is On Default FCSM user1 admin start LoginMonitoringEnabled clear Set Log commandset log archive Zoning SwitchOther Port bypass alpa Set Port commandenable alpa set port port number Disables the port DownDiagnostics Prepares the port for testing Authority Set Setup commandset setup Table 11. SNMP configuration settings Examples Table 12. System configuration settings Trap2Address about Show commandalarm show interface domainsdonor fabric Description Table 13. Show Port parametersEntry setup option post logsteering domain_id support switch topologyusers version FCSM: user1> show topology Class2FramesIn Authority Show Config commandshow config switch MFS TOV MSEnable True NoClose False Configuration Name: default LogoutMonitoringEnabled True RisingTrigger5LOSMonitoringEnabledTrue RisingTrigger100 FCSM: user1> show config zoning component Show Log commandsettings show log FCSM: user1> show log options byte Show Perf commanderrors port_number show perf FCSM: user1>: show perf Examples Syntax Show Setup commandshow setup Authority FCSM: user1> show setup snmp Syntax Shutdown commandshutdown Authority Internal for internal and external ports Test commandtest port port_number test_type test x external Syntax Uptime commanduptime Authority delete account_name User commanduser accounts admin@OB-session2 user1@OB-session3 FCSM admin user1 user del user3FCSM admin : user1> user list admin@OB-session1- in admin mode Syntax Whoami commandwhoami Authority copy zone_source zone_destination Zone commandzone add zone members type zone zone_type members zoneremove zone members rename zone old zone new wwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 active Zoneset commandzoneset activate zone_set Notes remove zone_set zone_listrename zone_set_old zone_set_new zones zone_set cancel Zoning commandedit limits save Examples 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 wwn wwn_b0241f 50:06:04:82:bf:d2:18:c250:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn_23bd31 50:06:04:82:bf:d2:18:c2 SAN Utility user interface 3 Using the SAN Utility Figure 2. Faceplate window Figure 1. Topology window Table 14. Menu shortcut keys Menu barFigure 3. Menu bar selection examples Toolbar button name ToolbarTable 15. Toolbar buttons Toolbar button Figure 4. Fabric tree Fabric treeGraphic window Data window and tabs Figure 5. Topology window Using the Topology windowWorking status indicator Status Fibre Channel switch module and link statusWorking with switch modules and links Switch module icon color Selecting switch modules and links Arranging switch modules in the window Figure 7. Faceplate window Using the Faceplate windowTopology data window tabs Selecting ports Opening the Faceplate window and pop-upmenusPort views and status Working with ports Opening pop-upmenus Setting up securityManaging fabrics Faceplate data window tabs 5.Click Add fabric Managing the fabric databaseAdding a fabric Removing a fabric Rediscovering a fabric Adding a new switch module to a fabricOpening a fabric view file Saving a fabric view file Displaying fabric information Replacing a failed switch module in a fabric4.Click Switch / Restore 2.Click Switch / Delete Description Switch module icon Figure 9. Active Zonesets window Zoning a fabricActive Zoneset Data window Soft zoning Zoning conceptsAccess control list zones Zones Zoning database Zoning configurationAliases Zone sets Zone merge failure Using the Zoning Config windowRestoring default zoning Merging fabrics and zoning Figure 11. Edit Zoning window Using the Edit Zoning windowZone merge failure recovery Table 18. Edit Zoning window toolbar buttons Managing zone sets Copying a zone to a zone set Creating a zone setActivating and deactivating a zone set Creating a zone in a zone set Managing zonesRemoving a zone set Removing all zoning definitions Removing a zone from a zone set Adding zone membersRenaming a zone or a zone set Removing a zone member Creating an alias Managing aliasesRemoving a zone from all zone sets Changing zone types Removing an alias from all zones Managing switch modulesAdding a member to an alias Figure 12. Faceplate data window Displaying switch module informationName Server data window •Click View ” Refresh Entry Switch Data windowTable 20. Switch data window entries Table 19. Name server data window entries Description Link data windowTable 20. Switch data window entries continued Entry Port Information Data window Configured Zonesets Data windowFabric view port graphing application Port Statistics Data window Configuring alarms Managing alarmsAlarm Log Data window Exporting alarm log information to a file Paging a switch moduleSetting the date and time Resetting a switch module Table 21. Switch module administrative states Configuring a switch moduleSwitch module properties Figure 15. Switch Properties window In-bandmanagement Domain ID and Domain ID LockBroadcast support Figure 16. Network Properties window Timeout valuesNetwork properties Table 22. Timeout values Table 23. IP configuration parameters Archiving a switch moduleIP configuration Remote logging Activating the fallback firmware Managing portsManaging firmware Loading firmware Table 24. Port mode descriptions Displaying port informationMonitoring port status Figure 17. Faceplate Display Data window Table 25. Port operational states Displaying port operational statesDisplaying port speeds Table 24. Port mode descriptions continued Table 27. SFP module media view Port graphing and Fabric View applicationPort Statistics Data window Displaying SFP module media status Total LIP received EntryDescription Table 29. Port Information Data window entries Port Information data window Figure 18. External Port Properties window Configuring portsName Server Data window Figure 19. Internal Port Properties window Changing port administrative states2.Click Port / Port Properties 2.Click Port / Port Properties Changing port speeds external ports onlyChanging port modes external ports only Table 30. Port administrative states Table 32. Port modes continued I/O stream guardExtending port credits 2.Click Port / Port Properties Figure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a port LED diagnostics 4 Switch management utility functions Internal firmware failure LED flash pattern Fatal error LED flash patternHeartbeat LED patterns Normal all pass LED flash pattern Port logged-inLED flash patterns Switch module fault LED flash patternSwitch module OK LED Configuration file system error LED flash pattern Table 33. E-portisolation causes and fixes Port testingPort fault LED flash patterns Figure 22. Port Loopback Test window Fibre Channel switch module monitoring using SNMPSNMP configuration Parameter SNMP trap configurationTable 34. SNMP configuration parameters Table 35. SNMP trap configuration parameters Table 36. Factory default configuration settings Configuration backupConfiguration restore Restoring the factory default configuration Restoring a switch module Using the Fabric View applicationReinitializing the configuration file system Figure 23. Fabric View graphs Starting the Fabric View applicationDisplaying port performance graphs Arranging and sizing port performance graphs Figure 24. Modify Graph Display window Customizing port performance graphs Table 37. Port mapping AMapping port locations and software numberingPort mapping Page Before you call Using the documentationHardware/Software service and support B Getting help and technical assistancePage Important notes C Notices Electromagnetic Compatibility EMC Regulatory Specifications and DisclaimersSafety Compliance Declaration of the Manufacturer or Importer Index Page Page Page