Intel SBCEFCSW manual Adding zone members, Renaming a zone or a zone set, Removing a zone member

4.Use one of the following methods to add ports or devices to the zone:

•In the zone set tree, select the zone set. In the graphic window, select the port to add to the zone. Click

Edit / Add Members.

•Select a port by port number, Fibre Channel address, or worldwide name in the Port or Device tree, and drag it into the zone.

•Select a port by port number, Fibre Channel address, or worldwide name in the Port and Device tree. Right-click the zone and select Add Zone Members from the pop-up menu.

5.Click Apply to save your changes to the zoning database.

Adding zone members

Adding a zone member to a zone affects every zone set in which that zone is a member. To add member ports and devices to a zone, choose one of the following methods:

•Select a port by port number, Fibre Channel address, or worldwide name in the Port and Device tree, and drag it into the zone. To select and drag multiple ports and devices, press and hold the Ctrl key while dragging.

•Select one or more ports by port number, Fibre Channel address, or worldwide name in the Port and Device tree. Right-click the zone and select Add Zone Members from the pop-up menu.

Click Apply to save your changes to the zoning database.

✏NOTE

Domain ID conflicts can result in automatic reassignment of switch module domain IDs. These reassignments are not reflected in zones that use domain ID and port number pair to define their membership. Be sure to reconfigure zones that are affected by a domain ID change.

Renaming a zone or a zone set

Complete the following steps to rename a zone:

1.In the Edit Zoning window, in the Zone Sets tree, click the zone or zone set to be renamed.

2.Click Edit / Rename.

3.In the Rename Zone/Rename Zone Set window, type a new name for the zone and zone set.

4.Click OK.

Removing a zone member

Removing a zone member will affect every zone and zone set in which that zone is a member. Complete the following steps to remove a member from a zone:

1.In the Edit Zoning window, select the zone member to be removed.

2.Click Edit / Remove.

3.Click OK to save the changes and close the Edit Zoning window.

Removing a zone from a zone set

Removing a zone from a zone set will affect every zone set in which that zone is a member. Zones that are no longer members of any zone set are moved to the orphan zone set. The orphan zone set is saved on the switch module.

Complete the following steps to delete a zone from a zone set:

1.In the Edit Zoning window, select the zone to be removed.

2.Click Edit / Remove.

3.Click OK to save the changes and close the Edit Zoning window.

96Intel Blade Server Switch Module SBCEFCSW Management and User’s Guide