Zoning command, Edit, Limits, Authority, Syntax | Intel SBCEFCSW

Zoning command

Opens a Zoning Edit session in which to create and manage zone sets and zones. See the “Zone command” on page 65” and the “Zoneset command” on page 68” for information about managing zone and zone sets.

Authority

Admin. The List keyword is available with User authority.

Syntax

zoning

active

cancel

clear

edit

history

limits

list

restore

save

Keywords

active

Displays membership information for the active zone set including member zones and zone members.

cancel

Closes the current Zoning Edit session. Any unsaved changes are lost.

clear

Clears all inactive zone sets from the volatile edit copy of the zoning database. This keyword does not affect the nonvolatile zoning database. However, if you enter the Zoning Clear command followed by the Zoning Save command, the nonvolatile zoning database will be cleared from the switch. The preferred method for clearing the zoning database from the switch is the Reset Zoning command.

edit

Opens a Zoning Edit session.

history

Displays a history of zoning modifications including the following:

•Time of the most recent zone set activation or deactivation and the user who performed it

•Time of the most recent modifications to the zoning database and the user who made them.

•Checksum for the zoning database.

limits

Displays the maximum limits imposed on the zoning database for the number of zone sets, zones, aliases, members per zone, members per alias, and total members.

list

Lists all fabric zoning definitions. This keyword is available with User authority.

restore

Reverts the changes to the zoning database that have been made during the current Zoning Edit session since the last Zoning Save command was entered.

70Intel Blade Server Switch Module SBCEFCSW Management and User’s Guide

Image 84

Intel SBCEFCSW Zoning command, edit, limits, Authority, Syntax, Keywords, zoning, active, cancel, clear, history, list

Contents

Intel Blade Server Switch Module SBCEFCSW Management and User’s GuideOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information General Safety Electrical Safety Handling electrostatic discharge-sensitivedevices Regulatory specifications and disclaimers Safety compliance Electromagnetic compatibility EMC Electromagnetic compatibility notice USA Japan EMC Compatibility RRL Korea xiii English translation of the previous noticePage 1 Introduction Related publications QLogic SAN Solutions Guide •QLogic Switch Interoperability Guide•QLogic SAN Configuration Guide: CLARiiON Storage •QLogic SAN Configuration Guide: LSI Storage Notices used in this book Page 2 Command line interface CLI Logging on to a switch Command syntax Commandscommand Table 1. Commands listed by authority level User authority commandsAdmin authority command Admin session commands Admin command admincancel Authority Alias command aliasadd alias members copy alias_source alias_destination remove alias members rename alias old alias new Config command configactivate config backup save config FCSM: user1> admin startFCSM admin : user1> config edit FCSM admin-config :user1> config cancel Date command dateMMDDhhmmCCYY Authority Fallback command fallbackAuthority Syntax Help command commandhelp keyword FCSM: user1> help set beacon set beacon On | Off History command historyAuthority Syntax Image command cleanupimage unpack file Lip command for external ports only port numberAuthority Syntax Passwd command passwdaccount_name Authority Ps command AuthoritySyntax Examples Quit command quit, exit, or logoutAuthority Syntax Reset command resetconfig config name switch Table 2. Switch configuration defaults Table 3. Port configuration defaultsDefault External port 0,15 default Table 3. Port configuration defaults continued Table 4. Threshold configuration defaultsExternal port 0,15 default Internal port 1-14default Table 5. SNMP configuration defaults Table 6. System configuration defaultsDefault Default Set command alarm clearconfig option setup option switch state DiagnosticsOnline Offline Set Config command set configport port number ports port number switch Table 7. Set Config port parameters continuedTable 8. Set Config switch parameters Parameter threshold Table 8. Set Config switch parameters continuedTable 9. Set Config threshold parameters zoning Table 10. Set Config zoning parameters On or to RAM volatile Off. The default is OnDefault Examples FCSM user1 admin start LoginMonitoringEnabled Set Log command set logarchive clear Switch OtherPort Zoning Set Port command enable alpaset port port number bypass alpa Down DiagnosticsPrepares the port for testing Disables the port Set Setup command set setupTable 11. SNMP configuration settings Authority Table 12. System configuration settings Examples Trap2Address Show command alarmshow about domains donorfabric interface Table 13. Show Port parameters EntryDescription post log steering domain_idsupport setup option topology usersversion switch FCSM: user1> show topology Class2FramesIn Show Config command show configswitch Authority MFS TOV MSEnable True NoClose False LogoutMonitoringEnabled True RisingTrigger5 LOSMonitoringEnabledTrue RisingTrigger100FCSM: user1> show config zoning Configuration Name: default Show Log command settingsshow log component FCSM: user1> show log options Show Perf command errors port_numbershow perf byte Examples FCSM: user1>: show perf Show Setup command show setupAuthority Syntax FCSM: user1> show setup snmp Shutdown command shutdownAuthority Syntax Test command testport port_number test_type Internal for internal and external ports test x external Uptime command uptimeAuthority Syntax User command useraccounts delete account_name FCSM admin user1 user del user3 FCSM admin : user1> user listadmin@OB-session1- in admin mode admin@OB-session2 user1@OB-session3 Whoami command whoamiAuthority Syntax Zone command zoneadd zone members copy zone_source zone_destination members zone remove zone membersrename zone old zone new type zone zone_type wwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 Zoneset command zonesetactivate zone_set active remove zone_set zone_list rename zone_set_old zone_set_newzones zone_set Notes Zoning command editlimits cancel Examples save wwn wwn_b0241f 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2fwwn_23bd31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 3 Using the SAN Utility SAN Utility user interface Figure 1. Topology window Figure 2. Faceplate window Menu bar Figure 3. Menu bar selection examplesTable 14. Menu shortcut keys Toolbar Table 15. Toolbar buttonsToolbar button Toolbar button name Fabric tree Graphic windowData window and tabs Figure 4. Fabric tree Using the Topology window Working status indicatorFigure 5. Topology window Fibre Channel switch module and link status Working with switch modules and linksSwitch module icon color Status Arranging switch modules in the window Selecting switch modules and links Using the Faceplate window Topology data window tabsFigure 7. Faceplate window Opening the Faceplate window and pop-upmenus Port views and statusWorking with ports Selecting ports Setting up security Managing fabricsFaceplate data window tabs Opening pop-upmenus Managing the fabric database Adding a fabricRemoving a fabric 5.Click Add fabric Adding a new switch module to a fabric Opening a fabric view fileSaving a fabric view file Rediscovering a fabric Replacing a failed switch module in a fabric 4.Click Switch / Restore2.Click Switch / Delete Displaying fabric information Switch module icon Description Zoning a fabric Active Zoneset Data windowFigure 9. Active Zonesets window Zoning concepts Access control list zonesZones Soft zoning Zoning configuration AliasesZone sets Zoning database Using the Zoning Config window Restoring default zoningMerging fabrics and zoning Zone merge failure Using the Edit Zoning window Zone merge failure recoveryFigure 11. Edit Zoning window Managing zone sets Table 18. Edit Zoning window toolbar buttons Creating a zone set Activating and deactivating a zone setCopying a zone to a zone set Managing zones Removing a zone setRemoving all zoning definitions Creating a zone in a zone set Adding zone members Renaming a zone or a zone setRemoving a zone member Removing a zone from a zone set Managing aliases Removing a zone from all zone setsChanging zone types Creating an alias Managing switch modules Adding a member to an aliasRemoving an alias from all zones Displaying switch module information Name Server data window•Click View ” Refresh Figure 12. Faceplate data window Switch Data window Table 20. Switch data window entriesTable 19. Name server data window entries Entry Link data window Table 20. Switch data window entries continuedEntry Description Configured Zonesets Data window Fabric view port graphing applicationPort Statistics Data window Port Information Data window Managing alarms Alarm Log Data windowConfiguring alarms Paging a switch module Setting the date and timeResetting a switch module Exporting alarm log information to a file Configuring a switch module Switch module propertiesFigure 15. Switch Properties window Table 21. Switch module administrative states Domain ID and Domain ID Lock Broadcast supportIn-bandmanagement Timeout values Network propertiesTable 22. Timeout values Figure 16. Network Properties window Archiving a switch module IP configurationRemote logging Table 23. IP configuration parameters Managing ports Managing firmwareLoading firmware Activating the fallback firmware Displaying port information Monitoring port statusFigure 17. Faceplate Display Data window Table 24. Port mode descriptions Displaying port operational states Displaying port speedsTable 24. Port mode descriptions continued Table 25. Port operational states Port graphing and Fabric View application Port Statistics Data windowDisplaying SFP module media status Table 27. SFP module media view Entry DescriptionTotal LIP received Port Information data window Table 29. Port Information Data window entries Configuring ports Name Server Data windowFigure 18. External Port Properties window Changing port administrative states 2.Click Port / Port PropertiesFigure 19. Internal Port Properties window Changing port speeds external ports only Changing port modes external ports onlyTable 30. Port administrative states 2.Click Port / Port Properties I/O stream guard Extending port credits2.Click Port / Port Properties Table 32. Port modes continued Figure 20. Extended Credits window Resetting a port 2.Click Port ” Reset Port 4 Switch management utility functions LED diagnostics Fatal error LED flash pattern Heartbeat LED patternsNormal all pass LED flash pattern Internal firmware failure LED flash pattern Switch module fault LED flash pattern Switch module OK LEDConfiguration file system error LED flash pattern Port logged-inLED flash patterns Port testing Port fault LED flash patternsTable 33. E-portisolation causes and fixes Fibre Channel switch module monitoring using SNMP SNMP configurationFigure 22. Port Loopback Test window SNMP trap configuration Table 34. SNMP configuration parametersTable 35. SNMP trap configuration parameters Parameter Configuration backup Configuration restoreRestoring the factory default configuration Table 36. Factory default configuration settings Using the Fabric View application Reinitializing the configuration file systemRestoring a switch module Starting the Fabric View application Displaying port performance graphsArranging and sizing port performance graphs Figure 23. Fabric View graphs Customizing port performance graphs Figure 24. Modify Graph Display window AMapping port locations and software numbering Port mappingTable 37. Port mapping Page Using the documentation Hardware/Software service and supportB Getting help and technical assistance Before you callPage C Notices Important notes Regulatory Specifications and Disclaimers Safety ComplianceDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMC Index Page Page Page