Manuals / Intel / Home Audio / Stereo Receiver

Intel SBCEFCSW manual Extended Credits window

Models: SBCEFCSW

1 156

Download 156 pages 18.47 Kb

Page 133

Figure 20. Extended Credits window

Complete the following steps to extend port buffer credits:

1.In the Faceplate window, select the ports that are to serve as donor ports. Click Port / Port Properties. In the Port Properties window, click Donor / OK.

✏NOTE

Donor ports are incapable of transmitting or receiving data.

2.In the Faceplate window, select the recipient port. Recipient ports must be external ports configured as G_Ports or F_Ports. Click Port / Extended Credits. The Extended Credits window opens as shown in Figure 20

Figure 20. Extended Credits window

3.Distribute the borrowed credits by incrementing the Ext Credits Requested field for the recipient ports up to the total credits in the pool. Click OK. If you exceed this total, a message is entered in the alarm log indicating that some recipient ports did not receive the requested credits.

4.To confirm that the requested credits were received, reopen the Extended Credits window and match the number of credits in the Ext Credits Requested column with the number in the Donated to Port column.

✏NOTE

As credits are used, the Logged-in LEDs on the corresponding donor ports are lit continuously. In addition, donor port Activity LEDs will reflect the same traffic as the recipient port. Donor ports whose credits are being used are unavailable to devices that are connected to them.

119

Image 133

Intel SBCEFCSW manual Extended Credits window

Contents

SBCEFCSW Management and User’s Guide Intel Blade Server Switch ModuleOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notice USA Electromagnetic compatibility EMCRRL Korea Japan EMC CompatibilityEnglish translation of the previous notice xiiiPage Related publications 1 Introduction•QLogic Switch Interoperability Guide QLogic SAN Solutions Guide•QLogic SAN Configuration Guide: CLARiiON Storage •QLogic SAN Configuration Guide: LSI StorageNotices used in this book Page Logging on to a switch 2 Command line interface CLICommands Command syntaxcommand User authority commands Table 1. Commands listed by authority levelAdmin authority command Admin session commandsadmin Admin commandcancel Authorityalias Alias commandadd alias members copy alias_source alias_destinationrename alias old alias new remove alias membersconfig Config commandactivate config backupFCSM: user1> admin start save configFCSM admin : user1> config edit FCSM admin-config :user1> config canceldate Date commandMMDDhhmmCCYY Authorityfallback Fallback commandAuthority Syntaxcommand Help commandhelp keywordFCSM: user1> help set beacon set beacon On | Off history History commandAuthority Syntaxcleanup Image commandimage unpack fileport number Lip command for external ports onlyAuthority Syntaxpasswd Passwd commandaccount_name AuthorityAuthority Ps commandSyntax Examplesquit, exit, or logout Quit commandAuthority Syntaxreset Reset commandconfig config name switchTable 3. Port configuration defaults Table 2. Switch configuration defaultsDefault External port 0,15 defaultTable 4. Threshold configuration defaults Table 3. Port configuration defaults continuedExternal port 0,15 default Internal port 1-14defaultTable 6. System configuration defaults Table 5. SNMP configuration defaultsDefault Defaultalarm clear Set commandconfig option setup optionDiagnostics switch stateOnline Offlineset config Set Config commandport port number ports port numberTable 7. Set Config port parameters continued switchTable 8. Set Config switch parameters ParameterTable 8. Set Config switch parameters continued thresholdTable 9. Set Config threshold parameters zoningOn or to RAM volatile Off. The default is On Table 10. Set Config zoning parametersDefault ExamplesFCSM user1 admin start LoginMonitoringEnabled set log Set Log commandarchive clearOther SwitchPort Zoningenable alpa Set Port commandset port port_number bypass alpaDiagnostics DownPrepares the port for testing Disables the portset setup Set Setup commandTable 11. SNMP configuration settings AuthorityExamples Table 12. System configuration settingsTrap2Address alarm Show commandshow aboutdonor domainsfabric interfaceEntry Table 13. Show Port parametersDescription steering domain_id post logsupport setup optionusers topologyversion switchFCSM: user1> show topology Class2FramesIn show config Show Config commandswitch AuthorityMFS TOV MSEnable True NoClose False LOSMonitoringEnabledTrue RisingTrigger100 LogoutMonitoringEnabled True RisingTrigger5FCSM: user1> show config zoning Configuration Name: defaultsettings Show Log commandshow log componentFCSM: user1> show log options errors port_number Show Perf commandshow perf byteFCSM: user1>: show perf Examplesshow setup Show Setup commandAuthority SyntaxFCSM: user1> show setup snmp shutdown Shutdown commandAuthority Syntaxtest Test commandport port_number test_type Internal for internal and external portstest x external uptime Uptime commandAuthority Syntaxuser User commandaccounts delete account_nameFCSM admin : user1> user list FCSM admin user1 user del user3admin@OB-session1- in admin mode admin@OB-session2 user1@OB-session3whoami Whoami commandAuthority Syntaxzone Zone commandadd zone members copy zone_source zone_destinationremove zone members members zonerename zone old zone new type zone zone_typewwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 zoneset Zoneset commandactivate zone_set activerename zone_set_old zone_set_new remove zone_set zone_listzones zone_set Notesedit Zoning commandlimits cancelsave Examples50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn wwn_b0241f 50:06:04:82:bf:d2:18:c2wwn_23bd31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31SAN Utility user interface 3 Using the SAN UtilityFigure 2. Faceplate window Figure 1. Topology windowFigure 3. Menu bar selection examples Menu barTable 14. Menu shortcut keys Table 15. Toolbar buttons ToolbarToolbar button Toolbar button nameGraphic window Fabric treeData window and tabs Figure 4. Fabric treeWorking status indicator Using the Topology windowFigure 5. Topology window Working with switch modules and links Fibre Channel switch module and link statusSwitch module icon color StatusSelecting switch modules and links Arranging switch modules in the windowTopology data window tabs Using the Faceplate windowFigure 7. Faceplate window Port views and status Opening the Faceplate window and pop-upmenusWorking with ports Selecting portsManaging fabrics Setting up securityFaceplate data window tabs Opening pop-upmenusAdding a fabric Managing the fabric databaseRemoving a fabric 5.Click Add fabricOpening a fabric view file Adding a new switch module to a fabricSaving a fabric view file Rediscovering a fabric4.Click Switch / Restore Replacing a failed switch module in a fabric2.Click Switch / Delete Displaying fabric informationDescription Switch module iconActive Zoneset Data window Zoning a fabricFigure 9. Active Zonesets window Access control list zones Zoning conceptsZones Soft zoningAliases Zoning configurationZone sets Zoning databaseRestoring default zoning Using the Zoning Config windowMerging fabrics and zoning Zone merge failureZone merge failure recovery Using the Edit Zoning windowFigure 11. Edit Zoning window Table 18. Edit Zoning window toolbar buttons Managing zone setsActivating and deactivating a zone set Creating a zone setCopying a zone to a zone set Removing a zone set Managing zonesRemoving all zoning definitions Creating a zone in a zone setRenaming a zone or a zone set Adding zone membersRemoving a zone member Removing a zone from a zone setRemoving a zone from all zone sets Managing aliasesChanging zone types Creating an aliasAdding a member to an alias Managing switch modulesRemoving an alias from all zones Name Server data window Displaying switch module information•Click View ” Refresh Figure 12. Faceplate data windowTable 20. Switch data window entries Switch Data windowTable 19. Name server data window entries EntryTable 20. Switch data window entries continued Link data windowEntry DescriptionFabric view port graphing application Configured Zonesets Data windowPort Statistics Data window Port Information Data windowAlarm Log Data window Managing alarmsConfiguring alarms Setting the date and time Paging a switch moduleResetting a switch module Exporting alarm log information to a fileSwitch module properties Configuring a switch moduleFigure 15. Switch Properties window Table 21. Switch module administrative statesBroadcast support Domain ID and Domain ID LockIn-bandmanagement Network properties Timeout valuesTable 22. Timeout values Figure 16. Network Properties windowIP configuration Archiving a switch moduleRemote logging Table 23. IP configuration parametersManaging firmware Managing portsLoading firmware Activating the fallback firmwareMonitoring port status Displaying port informationFigure 17. Faceplate Display Data window Table 24. Port mode descriptionsDisplaying port speeds Displaying port operational statesTable 24. Port mode descriptions continued Table 25. Port operational statesPort Statistics Data window Port graphing and Fabric View applicationDisplaying SFP module media status Table 27. SFP module media viewDescription EntryTotal LIP received Table 29. Port Information Data window entries Port Information data windowName Server Data window Configuring portsFigure 18. External Port Properties window 2.Click Port / Port Properties Changing port administrative statesFigure 19. Internal Port Properties window Changing port modes external ports only Changing port speeds external ports onlyTable 30. Port administrative states 2.Click Port / Port PropertiesExtending port credits I/O stream guard2.Click Port / Port Properties Table 32. Port modes continuedFigure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a portLED diagnostics 4 Switch management utility functionsHeartbeat LED patterns Fatal error LED flash patternNormal all pass LED flash pattern Internal firmware failure LED flash patternSwitch module OK LED Switch module fault LED flash patternConfiguration file system error LED flash pattern Port logged-inLED flash patternsPort fault LED flash patterns Port testingTable 33. E-portisolation causes and fixes SNMP configuration Fibre Channel switch module monitoring using SNMPFigure 22. Port Loopback Test window Table 34. SNMP configuration parameters SNMP trap configurationTable 35. SNMP trap configuration parameters ParameterConfiguration restore Configuration backupRestoring the factory default configuration Table 36. Factory default configuration settingsReinitializing the configuration file system Using the Fabric View applicationRestoring a switch module Displaying port performance graphs Starting the Fabric View applicationArranging and sizing port performance graphs Figure 23. Fabric View graphsFigure 24. Modify Graph Display window Customizing port performance graphsPort mapping AMapping port locations and software numberingTable 37. Port mapping Page Hardware/Software service and support Using the documentationB Getting help and technical assistance Before you callPage Important notes C NoticesSafety Compliance Regulatory Specifications and DisclaimersDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMCIndex Page Page Page