Intel SBCEFCSW manual Show Port parameters, Entry, Description

Table 13. Show Port parameters

Entry	Description
AIinit	Incremented each time the port begins AL initialization.
AIinitError	Number of times the port entered initialization and the initialization failed.
ClassXFramesIn	Number of class x frames received by this port.
ClassXFramesOut	Number of class x frames sent by this port.
ClassXWordsIn	Number of class x words received by this port.
ClassXWordsOut	Number of class x words sent by this port.
DecodeError	Decoding error detected.
EpConnects	Number of times an E_Port connects through ISL negotiation.
FBusy	Number of times the switch sent a F_BSY because Class 2 frame could not be
	delivered within ED_TOV time. Number of class 2 and class 3 fabric busy
	(F_BSY) frames generated by this port in response to incoming frames. This
	usually indicates a busy condition on the fabric or N_port that is preventing
	delivery of this frame.
Flowerrors	Received a frame when there were no available credits.
FReject	Number of frames from devices that were rejected.
InvalidCRC	Invalid CRC detected.
InvalidDestAddr	Invalid destination address detected.
LIP ALPD ALPS	Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets, performed.
LIPF7ALPS	This LIP is used to reinitialize the loop. An L_port, identified by AL_PS, may
	have noticed a performance degradation and is trying to restore the loop.
LIPF8ALPS	This LIP denotes a loop failure detected by the L_port identified by AL_PS.
LIPF7F7	A loop initialization primitive frame used to acquire a valid AL_PA.
LIPF8F7	A loop initialization primitive frame used to indicate that a loop failure has been
	detected at the receiver.
Link Failures	Number of optical link failures detected by this port. A link failure is a loss of
	synchronization for a period of time greater than the value of R_T_TOV or by
	loss of signal while not in the offline state. A loss of signal causes the switch to
	attempt to re-establish the link. If the link is not re-established by the time
	specified by R_T_TOV, a link failure is counted. A link reset is performed after
	a link failure.
Login	Time when user logged in.
Logout	Time when user logged out.
LoopTimeouts	A 2-second timeout as specified by FC-AL-2.
LossOfSync	Number of synchronization losses (>100 ms) detected by this port. A loss of
	synchronization is detected by receipt of an invalid transmission word.
PrimSeqErrors	Primitive sequence errors detected.
RxLinkResets	Number of link reset primatives received from an attached device.

44Intel Blade Server Switch Module SBCEFCSW Management and User’s Guide