Manuals / Intel / Home Audio / Stereo Receiver

Intel SBCEFCSW manual Fabric tree, Graphic window, Data window and tabs

Models: SBCEFCSW

1 156

Download 156 pages 18.47 Kb

Page 91

Fabric tree

Fabric tree

The fabric tree, in the FC Fabric pane, lists the managed fabrics and their switch modules. To adjust the window, click and drag the moveable window border. An entry handle to the left of an entry in the tree indicates that you can expand the entry. When you click the handle or double-click the entry, the entry expands to show its member switches. These fabric tree elements are shown in Figure 4.

Figure 4. Fabric tree

Each fabric tree entry has a small icon next to it that uses color to indicate the following operational status:

•A green switch module entry icon indicates that the switch is in normal operation.

•A red switch module entry icon indicates that the switch has a communications failure.

•A blue switch module entry icon indicates that the switch status is Unknown or that security is enabled on the switch module but security is disabled on the fabric management switch.

•An amber switch module entry icon indicates that the switch is operational with errors.

You can use the fabric tree to access any fabric or switch module using the Topology or Faceplate window. You can click a fabric entry to open the Topology window from the fabric tree. You can click a switch module entry to open the Faceplate window from the fabric tree.

Graphic window

The graphic window as shown in Figure 1 on page 74 shows graphic information about fabrics and switch modules such as the fabric topology and the switch faceplate. To adjust the window length, click and drag the window border that it shares with the data window.

Data window and tabs

The data window as shown in Figure 2 on page 74 displays a table of data and statistics associated with the selected tab. Use the scroll bar to browse through the data. The window length can be adjusted by clicking and dragging the border that it shares with the graphic window.

To adjust the column width, move the pointer over the column heading border shared by two columns until a right/left arrow graphic is displayed. Click and drag the arrow to the desired width. The data window tabs show options for the types of information that you can display in the data window. These options vary depending on the display.

77

Image 91

Intel SBCEFCSW manual Fabric tree, Graphic window, Data window and tabs

Contents

SBCEFCSW Management and User’s Guide Intel Blade Server Switch ModuleOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information Electrical Safety General SafetyHandling electrostatic discharge-sensitivedevices Safety compliance Regulatory specifications and disclaimersElectromagnetic compatibility notice USA Electromagnetic compatibility EMCRRL Korea Japan EMC CompatibilityEnglish translation of the previous notice xiiiPage Related publications 1 Introduction•QLogic SAN Configuration Guide: LSI Storage QLogic SAN Solutions Guide•QLogic Switch Interoperability Guide •QLogic SAN Configuration Guide: CLARiiON StorageNotices used in this book Page Logging on to a switch 2 Command line interface CLICommands Command syntaxcommand Admin session commands Table 1. Commands listed by authority levelUser authority commands Admin authority commandAuthority Admin commandadmin cancelcopy alias_source alias_destination Alias commandalias add alias membersrename alias old alias new remove alias membersbackup Config commandconfig activate configFCSM admin-config :user1> config cancel save configFCSM: user1> admin start FCSM admin : user1> config editAuthority Date commanddate MMDDhhmmCCYYSyntax Fallback commandfallback Authoritykeyword Help commandcommand helpFCSM: user1> help set beacon set beacon On | Off Syntax History commandhistory Authorityunpack file Image commandcleanup imageSyntax Lip command for external ports onlyport number AuthorityAuthority Passwd commandpasswd account_nameExamples Ps commandAuthority SyntaxSyntax Quit commandquit, exit, or logout Authorityswitch Reset commandreset config config nameExternal port 0,15 default Table 2. Switch configuration defaultsTable 3. Port configuration defaults DefaultInternal port 1-14default Table 3. Port configuration defaults continuedTable 4. Threshold configuration defaults External port 0,15 defaultDefault Table 5. SNMP configuration defaultsTable 6. System configuration defaults Defaultsetup option Set commandalarm clear config optionOffline switch stateDiagnostics Onlineports port number Set Config commandset config port port numberParameter switchTable 7. Set Config port parameters continued Table 8. Set Config switch parameterszoning thresholdTable 8. Set Config switch parameters continued Table 9. Set Config threshold parametersExamples Table 10. Set Config zoning parametersOn or to RAM volatile Off. The default is On DefaultFCSM user1 admin start LoginMonitoringEnabled clear Set Log commandset log archiveZoning SwitchOther Portbypass alpa Set Port commandenable alpa set port port_numberDisables the port DownDiagnostics Prepares the port for testingAuthority Set Setup commandset setup Table 11. SNMP configuration settingsExamples Table 12. System configuration settingsTrap2Address about Show commandalarm showinterface domainsdonor fabricEntry Table 13. Show Port parametersDescription setup option post logsteering domain_id supportswitch topologyusers versionFCSM: user1> show topology Class2FramesIn Authority Show Config commandshow config switchMFS TOV MSEnable True NoClose False Configuration Name: default LogoutMonitoringEnabled True RisingTrigger5LOSMonitoringEnabledTrue RisingTrigger100 FCSM: user1> show config zoningcomponent Show Log commandsettings show logFCSM: user1> show log options byte Show Perf commanderrors port_number show perfFCSM: user1>: show perf ExamplesSyntax Show Setup commandshow setup AuthorityFCSM: user1> show setup snmp Syntax Shutdown commandshutdown AuthorityInternal for internal and external ports Test commandtest port port_number test_typetest x external Syntax Uptime commanduptime Authoritydelete account_name User commanduser accountsadmin@OB-session2 user1@OB-session3 FCSM admin user1 user del user3FCSM admin : user1> user list admin@OB-session1- in admin modeSyntax Whoami commandwhoami Authoritycopy zone_source zone_destination Zone commandzone add zone memberstype zone zone_type members zoneremove zone members rename zone old zone newwwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 active Zoneset commandzoneset activate zone_setNotes remove zone_set zone_listrename zone_set_old zone_set_new zones zone_setcancel Zoning commandedit limitssave Examples50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:31 wwn wwn_b0241f 50:06:04:82:bf:d2:18:c250:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f wwn_23bd31 50:06:04:82:bf:d2:18:c2SAN Utility user interface 3 Using the SAN UtilityFigure 2. Faceplate window Figure 1. Topology windowFigure 3. Menu bar selection examples Menu barTable 14. Menu shortcut keys Toolbar button name ToolbarTable 15. Toolbar buttons Toolbar buttonFigure 4. Fabric tree Fabric treeGraphic window Data window and tabsWorking status indicator Using the Topology windowFigure 5. Topology window Status Fibre Channel switch module and link statusWorking with switch modules and links Switch module icon colorSelecting switch modules and links Arranging switch modules in the windowTopology data window tabs Using the Faceplate windowFigure 7. Faceplate window Selecting ports Opening the Faceplate window and pop-upmenusPort views and status Working with portsOpening pop-upmenus Setting up securityManaging fabrics Faceplate data window tabs5.Click Add fabric Managing the fabric databaseAdding a fabric Removing a fabricRediscovering a fabric Adding a new switch module to a fabricOpening a fabric view file Saving a fabric view fileDisplaying fabric information Replacing a failed switch module in a fabric4.Click Switch / Restore 2.Click Switch / DeleteDescription Switch module iconActive Zoneset Data window Zoning a fabricFigure 9. Active Zonesets window Soft zoning Zoning conceptsAccess control list zones ZonesZoning database Zoning configurationAliases Zone setsZone merge failure Using the Zoning Config windowRestoring default zoning Merging fabrics and zoningZone merge failure recovery Using the Edit Zoning windowFigure 11. Edit Zoning window Table 18. Edit Zoning window toolbar buttons Managing zone setsActivating and deactivating a zone set Creating a zone setCopying a zone to a zone set Creating a zone in a zone set Managing zonesRemoving a zone set Removing all zoning definitionsRemoving a zone from a zone set Adding zone membersRenaming a zone or a zone set Removing a zone memberCreating an alias Managing aliasesRemoving a zone from all zone sets Changing zone typesAdding a member to an alias Managing switch modulesRemoving an alias from all zones Figure 12. Faceplate data window Displaying switch module informationName Server data window •Click View ” RefreshEntry Switch Data windowTable 20. Switch data window entries Table 19. Name server data window entriesDescription Link data windowTable 20. Switch data window entries continued EntryPort Information Data window Configured Zonesets Data windowFabric view port graphing application Port Statistics Data windowAlarm Log Data window Managing alarmsConfiguring alarms Exporting alarm log information to a file Paging a switch moduleSetting the date and time Resetting a switch moduleTable 21. Switch module administrative states Configuring a switch moduleSwitch module properties Figure 15. Switch Properties windowBroadcast support Domain ID and Domain ID LockIn-bandmanagement Figure 16. Network Properties window Timeout valuesNetwork properties Table 22. Timeout valuesTable 23. IP configuration parameters Archiving a switch moduleIP configuration Remote loggingActivating the fallback firmware Managing portsManaging firmware Loading firmwareTable 24. Port mode descriptions Displaying port informationMonitoring port status Figure 17. Faceplate Display Data windowTable 25. Port operational states Displaying port operational statesDisplaying port speeds Table 24. Port mode descriptions continuedTable 27. SFP module media view Port graphing and Fabric View applicationPort Statistics Data window Displaying SFP module media statusDescription EntryTotal LIP received Table 29. Port Information Data window entries Port Information data windowName Server Data window Configuring portsFigure 18. External Port Properties window 2.Click Port / Port Properties Changing port administrative statesFigure 19. Internal Port Properties window 2.Click Port / Port Properties Changing port speeds external ports onlyChanging port modes external ports only Table 30. Port administrative statesTable 32. Port modes continued I/O stream guardExtending port credits 2.Click Port / Port PropertiesFigure 20. Extended Credits window 2.Click Port ” Reset Port Resetting a portLED diagnostics 4 Switch management utility functionsInternal firmware failure LED flash pattern Fatal error LED flash patternHeartbeat LED patterns Normal all pass LED flash patternPort logged-inLED flash patterns Switch module fault LED flash patternSwitch module OK LED Configuration file system error LED flash patternPort fault LED flash patterns Port testingTable 33. E-portisolation causes and fixes SNMP configuration Fibre Channel switch module monitoring using SNMPFigure 22. Port Loopback Test window Parameter SNMP trap configurationTable 34. SNMP configuration parameters Table 35. SNMP trap configuration parametersTable 36. Factory default configuration settings Configuration backupConfiguration restore Restoring the factory default configurationReinitializing the configuration file system Using the Fabric View applicationRestoring a switch module Figure 23. Fabric View graphs Starting the Fabric View applicationDisplaying port performance graphs Arranging and sizing port performance graphsFigure 24. Modify Graph Display window Customizing port performance graphsPort mapping AMapping port locations and software numberingTable 37. Port mapping Page Before you call Using the documentationHardware/Software service and support B Getting help and technical assistancePage Important notes C NoticesElectromagnetic Compatibility EMC Regulatory Specifications and DisclaimersSafety Compliance Declaration of the Manufacturer or ImporterIndex Page Page Page