Manuals / Intel / Home Audio / Stereo Receiver

Intel SBCEFCSW Heartbeat LED patterns, Normal all pass LED flash pattern, Switch module LEDs

Models: SBCEFCSW

1 156

Download 156 pages 18.47 Kb

Page 136

Figure 21. Switch module LEDs

Figure 21. Switch module LEDs

Heartbeat LED patterns

The heartbeat LED uses different flash patterns to indicate the following conditions:

•Normal

•Internal firmware failure

•Fatal error

•Configuration file system error

Normal (all pass) LED flash pattern

If POST diagnostics pass and the switch module processor is operating correctly, the switch will go to normal operation, and the heartbeat LED will flash at a steady rate of one flash per second.

Internal firmware failure LED flash pattern

An internal firmware failure flash pattern is two flashes per second followed by a 2-second pause, as shown in the following illustration. The two-flash error pattern indicates that the firmware has failed and that the switch module must be reset.

Fatal error LED flash pattern

A fatal error flash pattern is three flashes per second followed by a 2-second pause, as shown in the following illustration. The three-flash error pattern indicates that a fatal error has made the switch module inoperable. If a fatal error occurs, contact your technical support representative.

122Intel Blade Server Switch Module SBCEFCSW Management and User’s Guide

Image 136

Intel SBCEFCSW Heartbeat LED patterns, Normal all pass LED flash pattern, Internal firmware failure LED flash pattern

Contents

SBCEFCSW Management and User’s Guide Intel Blade Server Switch ModuleOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitivedevices Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility EMC Electromagnetic compatibility notice USAJapan EMC Compatibility RRL Koreaxiii English translation of the previous noticePage 1 Introduction Related publicationsQLogic SAN Solutions Guide •QLogic Switch Interoperability Guide•QLogic SAN Configuration Guide: CLARiiON Storage •QLogic SAN Configuration Guide: LSI StorageNotices used in this book Page 2 Command line interface CLI Logging on to a switchCommands Command syntaxcommand Table 1. Commands listed by authority level User authority commandsAdmin authority command Admin session commandsAdmin command admincancel AuthorityAlias command aliasadd alias members copy alias_source alias_destinationremove alias members rename alias old alias newConfig command configactivate config backupsave config FCSM: user1> admin startFCSM admin : user1> config edit FCSM admin-config :user1> config cancelDate command dateMMDDhhmmCCYY AuthorityFallback command fallbackAuthority SyntaxHelp command commandhelp keywordFCSM: user1> help set beacon set beacon On | Off History command historyAuthority SyntaxImage command cleanupimage unpack fileLip command for external ports only port numberAuthority SyntaxPasswd command passwdaccount_name AuthorityPs command AuthoritySyntax ExamplesQuit command quit, exit, or logoutAuthority SyntaxReset command resetconfig config name switchTable 2. Switch configuration defaults Table 3. Port configuration defaultsDefault External port 0,15 defaultTable 3. Port configuration defaults continued Table 4. Threshold configuration defaultsExternal port 0,15 default Internal port 1-14defaultTable 5. SNMP configuration defaults Table 6. System configuration defaultsDefault DefaultSet command alarm clearconfig option setup optionswitch state DiagnosticsOnline OfflineSet Config command set configport port number ports port numberswitch Table 7. Set Config port parameters continuedTable 8. Set Config switch parameters Parameterthreshold Table 8. Set Config switch parameters continuedTable 9. Set Config threshold parameters zoningTable 10. Set Config zoning parameters On or to RAM volatile Off. The default is OnDefault ExamplesFCSM user1 admin start LoginMonitoringEnabled Set Log command set logarchive clearSwitch OtherPort ZoningSet Port command enable alpaset port port_number bypass alpaDown DiagnosticsPrepares the port for testing Disables the portSet Setup command set setupTable 11. SNMP configuration settings AuthorityTable 12. System configuration settings ExamplesTrap2Address Show command alarmshow aboutdomains donorfabric interfaceEntry Table 13. Show Port parametersDescription post log steering domain_idsupport setup optiontopology usersversion switchFCSM: user1> show topology Class2FramesIn Show Config command show configswitch AuthorityMFS TOV MSEnable True NoClose False LogoutMonitoringEnabled True RisingTrigger5 LOSMonitoringEnabledTrue RisingTrigger100FCSM: user1> show config zoning Configuration Name: defaultShow Log command settingsshow log componentFCSM: user1> show log options Show Perf command errors port_numbershow perf byteExamples FCSM: user1>: show perfShow Setup command show setupAuthority SyntaxFCSM: user1> show setup snmp Shutdown command shutdownAuthority SyntaxTest command testport port_number test_type Internal for internal and external portstest x external Uptime command uptimeAuthority SyntaxUser command useraccounts delete account_nameFCSM admin user1 user del user3 FCSM admin : user1> user listadmin@OB-session1- in admin mode admin@OB-session2 user1@OB-session3Whoami command whoamiAuthority SyntaxZone command zoneadd zone members copy zone_source zone_destinationmembers zone remove zone membersrename zone old zone new type zone zone_typewwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 Zoneset command zonesetactivate zone_set activeremove zone_set zone_list rename zone_set_old zone_set_newzones zone_set NotesZoning command editlimits cancelExamples savewwn wwn_b0241f 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2fwwn_23bd31 50:06:04:82:bf:d2:18:c2 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:313 Using the SAN Utility SAN Utility user interfaceFigure 1. Topology window Figure 2. Faceplate windowFigure 3. Menu bar selection examples Menu barTable 14. Menu shortcut keys Toolbar Table 15. Toolbar buttonsToolbar button Toolbar button nameFabric tree Graphic windowData window and tabs Figure 4. Fabric treeWorking status indicator Using the Topology windowFigure 5. Topology window Fibre Channel switch module and link status Working with switch modules and linksSwitch module icon color StatusArranging switch modules in the window Selecting switch modules and linksTopology data window tabs Using the Faceplate windowFigure 7. Faceplate window Opening the Faceplate window and pop-upmenus Port views and statusWorking with ports Selecting portsSetting up security Managing fabricsFaceplate data window tabs Opening pop-upmenusManaging the fabric database Adding a fabricRemoving a fabric 5.Click Add fabricAdding a new switch module to a fabric Opening a fabric view fileSaving a fabric view file Rediscovering a fabricReplacing a failed switch module in a fabric 4.Click Switch / Restore2.Click Switch / Delete Displaying fabric informationSwitch module icon DescriptionActive Zoneset Data window Zoning a fabricFigure 9. Active Zonesets window Zoning concepts Access control list zonesZones Soft zoningZoning configuration AliasesZone sets Zoning databaseUsing the Zoning Config window Restoring default zoningMerging fabrics and zoning Zone merge failureZone merge failure recovery Using the Edit Zoning windowFigure 11. Edit Zoning window Managing zone sets Table 18. Edit Zoning window toolbar buttonsActivating and deactivating a zone set Creating a zone setCopying a zone to a zone set Managing zones Removing a zone setRemoving all zoning definitions Creating a zone in a zone setAdding zone members Renaming a zone or a zone setRemoving a zone member Removing a zone from a zone setManaging aliases Removing a zone from all zone setsChanging zone types Creating an aliasAdding a member to an alias Managing switch modulesRemoving an alias from all zones Displaying switch module information Name Server data window•Click View ” Refresh Figure 12. Faceplate data windowSwitch Data window Table 20. Switch data window entriesTable 19. Name server data window entries EntryLink data window Table 20. Switch data window entries continuedEntry DescriptionConfigured Zonesets Data window Fabric view port graphing applicationPort Statistics Data window Port Information Data windowAlarm Log Data window Managing alarmsConfiguring alarms Paging a switch module Setting the date and timeResetting a switch module Exporting alarm log information to a fileConfiguring a switch module Switch module propertiesFigure 15. Switch Properties window Table 21. Switch module administrative statesBroadcast support Domain ID and Domain ID LockIn-bandmanagement Timeout values Network propertiesTable 22. Timeout values Figure 16. Network Properties windowArchiving a switch module IP configurationRemote logging Table 23. IP configuration parametersManaging ports Managing firmwareLoading firmware Activating the fallback firmwareDisplaying port information Monitoring port statusFigure 17. Faceplate Display Data window Table 24. Port mode descriptionsDisplaying port operational states Displaying port speedsTable 24. Port mode descriptions continued Table 25. Port operational statesPort graphing and Fabric View application Port Statistics Data windowDisplaying SFP module media status Table 27. SFP module media viewDescription EntryTotal LIP received Port Information data window Table 29. Port Information Data window entriesName Server Data window Configuring portsFigure 18. External Port Properties window 2.Click Port / Port Properties Changing port administrative statesFigure 19. Internal Port Properties window Changing port speeds external ports only Changing port modes external ports onlyTable 30. Port administrative states 2.Click Port / Port PropertiesI/O stream guard Extending port credits2.Click Port / Port Properties Table 32. Port modes continuedFigure 20. Extended Credits window Resetting a port 2.Click Port ” Reset Port4 Switch management utility functions LED diagnosticsFatal error LED flash pattern Heartbeat LED patternsNormal all pass LED flash pattern Internal firmware failure LED flash patternSwitch module fault LED flash pattern Switch module OK LEDConfiguration file system error LED flash pattern Port logged-inLED flash patternsPort fault LED flash patterns Port testingTable 33. E-portisolation causes and fixes SNMP configuration Fibre Channel switch module monitoring using SNMPFigure 22. Port Loopback Test window SNMP trap configuration Table 34. SNMP configuration parametersTable 35. SNMP trap configuration parameters ParameterConfiguration backup Configuration restoreRestoring the factory default configuration Table 36. Factory default configuration settingsReinitializing the configuration file system Using the Fabric View applicationRestoring a switch module Starting the Fabric View application Displaying port performance graphsArranging and sizing port performance graphs Figure 23. Fabric View graphsCustomizing port performance graphs Figure 24. Modify Graph Display windowPort mapping AMapping port locations and software numberingTable 37. Port mapping Page Using the documentation Hardware/Software service and supportB Getting help and technical assistance Before you callPage C Notices Important notesRegulatory Specifications and Disclaimers Safety ComplianceDeclaration of the Manufacturer or Importer Electromagnetic Compatibility EMCIndex Page Page Page