Manuals / Intel / Home Audio / Stereo Receiver

Intel SBCEFCSW manual Regulatory specifications and disclaimers, Safety compliance

Models: SBCEFCSW

1 156

Download 156 pages 18.47 Kb

Page 10

Image 10

Regulatory specifications and disclaimers

Danger: DANGER

Danger: Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following:

Danger: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.

CAUTION:

Hazardous energy is present when the blade is connected to the power source. Always replace the blade cover before installing the blade.

Regulatory specifications and disclaimers

Safety compliance

USA:	UL 60950 - 3rd Edition/CSA 22.2. No. 60950

Canada:	cUL certified - 3rd Edition/CSA 22.2. No. 60950- for Canada (product bears the single
	cUL mark for U.S. and Canada)

Europe:	Low Voltage Directive, 73/23/EEC
	UL/CB to EN60950 3rd Edition

International:	UL/CB to IEC 60950 3rd Edition
	UL/CB - EN60 950 3rd Edition
	UL/CB - EMKO-TSE (74-SEC) 207/94

Australia/New	CB Report to IEC 60950, 3rd Edition plus international deviations
Zealand:

xIntel Blade Server Switch Module SBCEFCSW Module Management and User’s Guide

Page 10

Image 10

Intel SBCEFCSW manual Regulatory specifications and disclaimers, Safety compliance

Contents

SBCEFCSW Management and User’s Guide Intel Blade Server Switch ModuleOrder Number C39671-003 Disclaimer Contents Page Contents 4 Switch management utility functions Safety and regulatory information General Safety Electrical SafetyHandling electrostatic discharge-sensitivedevices Regulatory specifications and disclaimers Safety complianceElectromagnetic compatibility EMC Electromagnetic compatibility notice USAJapan EMC Compatibility RRL Koreaxiii English translation of the previous noticePage 1 Introduction Related publications•QLogic SAN Configuration Guide: CLARiiON Storage QLogic SAN Solutions Guide•QLogic Switch Interoperability Guide •QLogic SAN Configuration Guide: LSI StorageNotices used in this book Page 2 Command line interface CLI Logging on to a switchCommands Command syntaxcommand Admin authority command Table 1. Commands listed by authority levelUser authority commands Admin session commandscancel Admin commandadmin Authorityadd alias members Alias commandalias copy alias_source alias_destinationremove alias members rename alias old alias newactivate config Config commandconfig backupFCSM admin : user1> config edit save configFCSM: user1> admin start FCSM admin-config :user1> config cancelMMDDhhmmCCYY Date commanddate AuthorityAuthority Fallback commandfallback Syntaxhelp Help commandcommand keywordFCSM: user1> help set beacon set beacon On | Off Authority History commandhistory Syntaximage Image commandcleanup unpack fileAuthority Lip command for external ports onlyport number Syntaxaccount_name Passwd commandpasswd AuthoritySyntax Ps commandAuthority ExamplesAuthority Quit commandquit, exit, or logout Syntaxconfig config name Reset commandreset switchDefault Table 2. Switch configuration defaultsTable 3. Port configuration defaults External port 0,15 defaultExternal port 0,15 default Table 3. Port configuration defaults continuedTable 4. Threshold configuration defaults Internal port 1-14defaultDefault Table 5. SNMP configuration defaultsTable 6. System configuration defaults Defaultconfig option Set commandalarm clear setup optionOnline switch stateDiagnostics Offlineport port number Set Config commandset config ports port numberTable 8. Set Config switch parameters switchTable 7. Set Config port parameters continued ParameterTable 9. Set Config threshold parameters thresholdTable 8. Set Config switch parameters continued zoningDefault Table 10. Set Config zoning parametersOn or to RAM volatile Off. The default is On ExamplesFCSM user1 admin start LoginMonitoringEnabled archive Set Log commandset log clearPort SwitchOther Zoningset port port_number Set Port commandenable alpa bypass alpaPrepares the port for testing DownDiagnostics Disables the portTable 11. SNMP configuration settings Set Setup commandset setup AuthorityTable 12. System configuration settings ExamplesTrap2Address show Show commandalarm aboutfabric domainsdonor interfaceEntry Table 13. Show Port parametersDescription support post logsteering domain_id setup optionversion topologyusers switchFCSM: user1> show topology Class2FramesIn switch Show Config commandshow config AuthorityMFS TOV MSEnable True NoClose False FCSM: user1> show config zoning LogoutMonitoringEnabled True RisingTrigger5LOSMonitoringEnabledTrue RisingTrigger100 Configuration Name: defaultshow log Show Log commandsettings componentFCSM: user1> show log options show perf Show Perf commanderrors port_number byteExamples FCSM: user1>: show perfAuthority Show Setup commandshow setup SyntaxFCSM: user1> show setup snmp Authority Shutdown commandshutdown Syntaxport port_number test_type Test commandtest Internal for internal and external portstest x external Authority Uptime commanduptime Syntaxaccounts User commanduser delete account_nameadmin@OB-session1- in admin mode FCSM admin user1 user del user3FCSM admin : user1> user list admin@OB-session2 user1@OB-session3Authority Whoami commandwhoami Syntaxadd zone members Zone commandzone copy zone_source zone_destinationrename zone old zone new members zoneremove zone members type zone zone_typewwn_0160ed zone_set_1 wwn_c001b0 zone_set_1 activate zone_set Zoneset commandzoneset activezones zone_set remove zone_set zone_listrename zone_set_old zone_set_new Noteslimits Zoning commandedit cancelExamples savewwn_23bd31 50:06:04:82:bf:d2:18:c2 wwn wwn_b0241f 50:06:04:82:bf:d2:18:c250:06:04:82:bf:d2:18:d2 21:00:00:e0:8b:02:41:2f 50:06:04:82:bf:d2:18:d2 10:00:00:00:c9:23:bd:313 Using the SAN Utility SAN Utility user interfaceFigure 1. Topology window Figure 2. Faceplate windowFigure 3. Menu bar selection examples Menu barTable 14. Menu shortcut keys Toolbar button ToolbarTable 15. Toolbar buttons Toolbar button nameData window and tabs Fabric treeGraphic window Figure 4. Fabric treeWorking status indicator Using the Topology windowFigure 5. Topology window Switch module icon color Fibre Channel switch module and link statusWorking with switch modules and links StatusArranging switch modules in the window Selecting switch modules and linksTopology data window tabs Using the Faceplate windowFigure 7. Faceplate window Working with ports Opening the Faceplate window and pop-upmenusPort views and status Selecting portsFaceplate data window tabs Setting up securityManaging fabrics Opening pop-upmenusRemoving a fabric Managing the fabric databaseAdding a fabric 5.Click Add fabricSaving a fabric view file Adding a new switch module to a fabricOpening a fabric view file Rediscovering a fabric2.Click Switch / Delete Replacing a failed switch module in a fabric4.Click Switch / Restore Displaying fabric informationSwitch module icon DescriptionActive Zoneset Data window Zoning a fabricFigure 9. Active Zonesets window Zones Zoning conceptsAccess control list zones Soft zoningZone sets Zoning configurationAliases Zoning databaseMerging fabrics and zoning Using the Zoning Config windowRestoring default zoning Zone merge failureZone merge failure recovery Using the Edit Zoning windowFigure 11. Edit Zoning window Managing zone sets Table 18. Edit Zoning window toolbar buttonsActivating and deactivating a zone set Creating a zone setCopying a zone to a zone set Removing all zoning definitions Managing zonesRemoving a zone set Creating a zone in a zone setRemoving a zone member Adding zone membersRenaming a zone or a zone set Removing a zone from a zone setChanging zone types Managing aliasesRemoving a zone from all zone sets Creating an aliasAdding a member to an alias Managing switch modulesRemoving an alias from all zones •Click View ” Refresh Displaying switch module informationName Server data window Figure 12. Faceplate data windowTable 19. Name server data window entries Switch Data windowTable 20. Switch data window entries EntryEntry Link data windowTable 20. Switch data window entries continued DescriptionPort Statistics Data window Configured Zonesets Data windowFabric view port graphing application Port Information Data windowAlarm Log Data window Managing alarmsConfiguring alarms Resetting a switch module Paging a switch moduleSetting the date and time Exporting alarm log information to a fileFigure 15. Switch Properties window Configuring a switch moduleSwitch module properties Table 21. Switch module administrative statesBroadcast support Domain ID and Domain ID LockIn-bandmanagement Table 22. Timeout values Timeout valuesNetwork properties Figure 16. Network Properties windowRemote logging Archiving a switch moduleIP configuration Table 23. IP configuration parametersLoading firmware Managing portsManaging firmware Activating the fallback firmwareFigure 17. Faceplate Display Data window Displaying port informationMonitoring port status Table 24. Port mode descriptionsTable 24. Port mode descriptions continued Displaying port operational statesDisplaying port speeds Table 25. Port operational statesDisplaying SFP module media status Port graphing and Fabric View applicationPort Statistics Data window Table 27. SFP module media viewDescription EntryTotal LIP received Port Information data window Table 29. Port Information Data window entriesName Server Data window Configuring portsFigure 18. External Port Properties window 2.Click Port / Port Properties Changing port administrative statesFigure 19. Internal Port Properties window Table 30. Port administrative states Changing port speeds external ports onlyChanging port modes external ports only 2.Click Port / Port Properties2.Click Port / Port Properties I/O stream guardExtending port credits Table 32. Port modes continuedFigure 20. Extended Credits window Resetting a port 2.Click Port ” Reset Port4 Switch management utility functions LED diagnosticsNormal all pass LED flash pattern Fatal error LED flash patternHeartbeat LED patterns Internal firmware failure LED flash patternConfiguration file system error LED flash pattern Switch module fault LED flash patternSwitch module OK LED Port logged-inLED flash patternsPort fault LED flash patterns Port testingTable 33. E-portisolation causes and fixes SNMP configuration Fibre Channel switch module monitoring using SNMPFigure 22. Port Loopback Test window Table 35. SNMP trap configuration parameters SNMP trap configurationTable 34. SNMP configuration parameters ParameterRestoring the factory default configuration Configuration backupConfiguration restore Table 36. Factory default configuration settingsReinitializing the configuration file system Using the Fabric View applicationRestoring a switch module Arranging and sizing port performance graphs Starting the Fabric View applicationDisplaying port performance graphs Figure 23. Fabric View graphsCustomizing port performance graphs Figure 24. Modify Graph Display windowPort mapping AMapping port locations and software numberingTable 37. Port mapping Page B Getting help and technical assistance Using the documentationHardware/Software service and support Before you callPage C Notices Important notesDeclaration of the Manufacturer or Importer Regulatory Specifications and DisclaimersSafety Compliance Electromagnetic Compatibility EMCIndex Page Page Page