Intel SBCEFCSW manual threshold, zoning, Set Config switch parameters continued

Table 8. Set Config switch parameters (continued)

Parameter	Description
DS_TOV	Distributed Services Timeout Value (Management Server, Name Server). The
	default is 5000 msec.
PrincipalPriority	The priority used in the FC-SW-2 principal switch selection algorithm. 1 is high,
	255 is low.
ConfigDescription	The name for the configuration. The default is undefined.

threshold

Initiates a configuration session by which to generate and log alarms for selected events. Each event, its thresholds, and sampling interval is displayed, one line at a time and you are prompted for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. These parameters must be saved in a configuration and activated before they will take effect. See the “Config command” on page 11 for information about saving and activating a configuration. Table 9 describes the Set Config threshold parameters.

Table 9. Set Config threshold parameters

Parameter		Description
Threshold Monitoring Enabled	Master enable/disable parameter for all events. Enables (True) or
	disables (False) the generation of all enabled event alarms.
CRCErrorsMonitoringEnabled	The event type enable/disable parameter. Enables (True) or disables
DecodeErrorsMonitoringEnabled	(False) the generation of alarms for each of the following events:
ISLMonitoringEnabled	•	CRC errors
LoginMonitoringEnabled
	•	Decode errors
LogoutMonitoringEnabled
	•	ISL connection count
LOSMonitoringEnabled
	•	Login errors
	•	Logout errors
	• Loss-of-signal errors
Rising Trigger	The event count above which an event is logged. Once the count
	exceeds the rising threshold, one alarm is logged. The switch will not
	generate another alarm for that event until the count falls below the
	falling threshold and rises again above the rising threshold.
Falling Trigger	The event count above which an event becomes eligible for logging in
	the alarm log.
Sample Window	The period of time in seconds in which to count events.

zoning

Initiates an editing session in which to change switch zoning attributes. Each parameter is displayed, one line at a time, and you are prompted for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

31