Chapter 6 | CLI – Layer 2 |
|
|
set snmp timeout
Use the set snmp timeout command to set the SNMP timeout in seconds. This command is useful for access using the Device Manager.
The syntax for this command is:
set snmp timeout <number>
set system location
Use the set system location command to set the mib2 system location MIB variable.
The syntax for this command is:
set system location [<string>]
string | Location name. The location name is cleared if this field is left |
| blank. A string of 2 words or more must be type in quotation |
| marks – e.g. “Operations Floor”. |
set system name
Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [<string>]
string | System name. The system name is cleared if this field is left blank. A |
| string of 2 words or more must be type in quotation marks – |
| e.g. “Backbone Stack”. |
set system contact
Use the set system contact command to set mib2 system contact MIB variable.
The syntax for this command is:
set system contact [<string>]
string | Contact person. The contact person field is cleared if this field is |
| blank. A string of 2 words or more must be type in quotation |
| marks – e.g. “Yigdal Naouri”. |
96 | Avaya P332MF User’s Guide |
