
Chapter 6 | CLI – Layer 2 |
|
|
Privileged Level Commands
Following is a table of the Privileged Level commands. This level includes all the commands from the User Level described above (see the User Level Commands Section for a description of these common commands).
• | no hostname | Returns the prompt to its default. | Page 82 |
• | no rmon history | Deletes an existing history entry. | Page 82 |
• | no rmon alarm | Deletes an existing alarm entry. | Page 82 |
• | no rmon event | Deletes an existing event entry. | Page 83 |
• | hostname | Displays or sets a new prompt. | Page 83 |
• | clear1 | Clears current settings | Page 83 |
|
| (a group of commands). |
|
• | set2 | Sets the switch parameters | Page 88 |
|
| (a group of commands). |
|
• | sync time | Synchronizes the time between switches. | Page 118 |
• | get time | Gets the time from the time server. | Page 123 |
• | reset | Restarts the system or a switch. | Page 124 |
• | reset stack | Causes a hardware reset to the stack. | Page 124 |
• | reset mgp | Causes a software reset to the Media | Page 124 |
|
| Gateway Processor. |
|
• | nvram initialize | Initializes the NVRAM to its factory | Page 125 |
|
| defaults. |
|
• | rmon history | Creates a history entry. | Page 126 |
• | rmon alarm | Creates an alarm entry. | Page 127 |
• | rmon event | Creates an event entry. | Page 128 |
• | copy | Uploads stack configuration to a file | Page 128 |
| tftp | (using TFTP). The file must exist before |
|
|
| you Upload. |
|
• | copy module- | Uploads switch configuration to a file | Page 129 |
| config tftp | (using TFTP). The file must exist before you |
|
|
| Upload. |
|
• | copy tftp stack- | Downloads a stack configuration file | Page 130 |
| config | (using TFTP) into the device. |
|
Avaya P332MF User’s Guide | 81 |