Avaya P332MF manual Set autopartition, Set license

Chapter 6 CLI – Layer 2

Example:

To set the priority to 45000:

P330-N# set spantree priority 45000

Priority enabled

set autopartition

Use the set autopartition command to enable or disable auto-partitioning on specific switches of the stack.

Note: This command can not be executed on the P332G-ML and P332GT-ML switches. This command is used to set the autopartition status for the other P330 switches in the stack.

The syntax for this command is:

set autopartition <enabledisable>[module]

Output Example:

P330-N# set autopartition enable 3

Auto-partition is enabled in module 3.

set license

The set license command enables you to activate the SMON/routing capability of the Avaya P330 stack. An Avaya P330 stack can include several Avaya P330 switches. One SMON/routing license is required per Avaya P330 stack.

For a full description of the SMON/routing License and the installation procedure please refer to the Installation Guide provided with the SMON/routing License.

The syntax for this command is:

set license [module] [license] [featureName]

module	The switch number
license	The license number
featureName	The name of the feature, either smon or routing

Example:

P330-N> set license 1 021 1ad bad ca5 8d2 ccd smon

116 Avaya P332MF User’s Guide