Chapter 6 | CLI – Layer 2 |
|
|
show port auto-negotiation-flowcontrol-advertisement
Use the show port
The syntax for this command is:
show port auto-negotiation-flowcontrol-advertisement
[<mod_num>[/<port_num>]]
mod_num | Number of the switch |
port num | Number of the port |
Output Example:
Port 1/2 advertises no flow control capabilities. Port 1/3 advertises no flow control capabilities. etc.
show trunk
Use the show trunk command to display VLAN tagging information of the ports, port binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Output Example: |
|
| |
| |||
Port | Mode | Binding mode | Native vlan |
1/1 | dot1q | bound to configured vlans | 1 |
1/2 | dot1q | bound to all vlans | 1 |
1/3 | off | statically bound | 1 |
1/4 | off | statically bound | 1 |
1/5 | off | statically bound | 1 |
Avaya P332MF User’s Guide | 63 |