Wasp Bar Code WLS 9500 quick start Troubleshooting, Problem

Quick Start Guide

TROUBLESHOOTING

Problem	Scanner not working				Scanner not decoding barcode
	No power	Incorrect		Interface/power	Scanner not	Barcode	Distance
	to scanner	interface		cables are	programmed	unreadable	between
Possible Cause		cable		loose	for barcode		scanner
		used			type		and
							barcode
							incorrect
	Check	Ensure		Check for	Program the	Ensure	Move
Resolution	system	that		loose cable	scanner to	barcode is	scanner
	power;	correct		connections	read that	not	closer to
	ensure	interface			type of	defaced;	or
	power	cable is			barcode.	try	further
	supply, if	used				scanning	from
	required,					test	barcode
	is					barcode of
	connected.					same
						barcode
						type
Problem	Scanner decoding barcode, but data				No keyboard connected
	not transmitting to host
Possible Cause	Scanner not		Interface cable is		A keyboard is not being used with this
	programmed for		loose		device.
	correct host
	interface
Resolution	Check scanner		Check for loose		Scan the IBM AT NOTEBOOK
	host parameters		cable connections		barcode (This barcode is provided
	or edit options				below in the Start Here if you have a
	(The scanner				keyboard wedge scanner section.)
	host barcodes
	are provided
	below in the
	Start Here if you
	have a USB
	scanner section
	and the Start
	Here if you have
	a keyboard
	wedge scanner
	section.)

4