
APPENDIX D: How to Read the Latitude Scale
Introduction
As Max needs to be polar aligned, you will need to set the latitude scale for you lati- tude range. The Latitude scale has three sets of measurements, one for each latitude range: 0 to 30°, 30° to 60° and 60 to 90°. Note that there are five extra degrees beyond both 0 and 90°. This allows you to add for latitudes just slightly below 0 and just slight- ly above 90 degrees. For instructions as to how to set up the pedestal (or wedge) for you latitude range, see step 8, page 15.
A short tick marks on the scale represents
Count the longer tick marks down to the indicator
Line up your latitude with the indicator
In the example above, lets say you have chosen the latitude range of 30 to 60 degrees. This is the middle set of numbers (30, 40, 50 and 60). Count the number of longer tick marks from 40 down to the indicator. Always count from the set of num- bers closest to the indicator. As there are four longer ticks down to the indicator, the scale reads 44 degrees. If you had chosen the 0 to 30 degree range, the scale reads 14 degrees. Additionally, if you chosen the 60 to 90 degree range, the scale reads 74 degrees.
58 | Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the |
| Sun. Do not look through the telescope as it is moving. |