Chapter 6 | CLI – Layer 2 |
|
|
• | copy tftp module- | Downloads a switch configuration file | Page 130 |
| config | (using TFTP). |
|
• | copy tftp | Downloads the Device Manager S/W | Page 131 |
| EW_Archive | (Embedded Web Archive file), using |
|
|
| TFTP, into the device. |
|
• | copy tftp | Updates the software image and device | Page 131 |
| SW_image | manager application of a designated |
|
|
| switch. |
|
• | radius | Sets radius authentication parameters. | Page 132 |
| authentication3 |
|
|
1 The clear command corresponds to a group of commands and is shown in a separate Table on Page 83.
2The set command corresponds to a group of commands and is shown in a separate Table on Page 88.
3The radius authentication commands corresponds to a group of commands listed on Page 132.
no hostname
Use the no hostname command to return the CLI prompt to its default.
The syntax for this command is:
no hostname
Note: If this command is to be implemented on a switch other than the stack master, a session should be opened to the relevant switch.
no rmon history
Use the no rmon history command to delete an existing RMON history entry.
The syntax for this command is:
no rmon history <History Index>
no rmon alarm
Use the no rmon alarm command to delete an existing RMON alarm entry.
The syntax for this command is:
no rmon alarm <Alarm Index>
82 | Avaya P332MF User’s Guide |
