Avaya P332MF manual Clear screen, Ping

Chapter 6 CLI – Layer 2

clear screen

The clear screen command clears the current terminal display.

The syntax for this command is:

clear screen

ping

Use the ping command to send ICMP echo request packets to another node on the network.

The syntax for this command is:

ping [host[number]]

host	Host IP address/Internet address of route destination. If missing
	then the last host IP is used.
number	Number of packets to send. If missing, then the last number is used.
	If the last number is not available, the default is 4.

Note: You can use this command via the Master switch only.

Output Example:

To ping the IP number 149.49.48.1 four times:

P330-N> ping 149.49.48.1 4

PING 149.49.48.1: 56 data bytes

64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms

64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms

64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms

P330-1(super)# 64 bytes from 149.49.48.1: icmp_seq=3. time=0. ms

----149.49.48.1 PING Statistics----

4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 0/0/0

Avaya P332MF User’s Guide 41