Avaya P332MF Show port self-loop-discovery module num/port number, Show internal buffering

Chapter 6 CLI – Layer 2

show port self-loop-discovery

Use the show port self-loop-discoverycommand to display which port or switch has an enabled IBM™ token ring cable loop discovery status.

Note: This command is not supported by the P330-ML switches.

Note: If this command is to be implemented on a switch other than the stack master, a session should be opened to the relevant switch.

The syntax for this command is:

show port self-loop-discovery [module num/port number]

Output Example:

P330-N> show port self-loop-discovery 1/5

Self-Loop-Discovery is enabled on port 1/5.

show internal buffering

The show internal buffering command displays the size options (Maximum, Minimum, or Medium) of the Receive (Rx) buffer allocated to each port of the specified switch.

The syntax for this command is:

show internal buffering [<mod_num>]

Output Example:

P330-N>	show internal buffering 1
Module	Internal Buffer
------	---------------
1	med

Note: Internal buffering for the P330-ML switches will always have the value Not supported. This command is used to display the internal buffering status for the other P330 switches in the stack.

Avaya P332MF User’s Guide 57