Chapter 6 | CLI – Layer 2 |
|
|
•set port spantree cost
•set port security
•set cascading
•set inband vlan
•set vlan
•set port flowcontrol
•set port auto- negotiation- flowcontrol- advertisement
•set trunk
•set
•set spantree
•set spantree priority
•set autopartition
•set license
•set ppp authentication incoming
•set ppp incoming timeout
•set ppp
•set web
•set
•set
Sets the port spantree cost. | Page 110 |
Enables MAC security on a range of | Page 111 |
ports. |
|
Sets switch cascading | Page 111 |
mode. |
|
Sets the management VLAN ID. | Page 111 |
Creates VLANs. | Page 112 |
Sets the flow control mode of a port. | Page 112 |
Sets the flowcontrol advertising | Page 114 |
capabilities of a Gigabit port. |
|
Sets the tagging mode of a port. | Page 114 |
Enables/disables | Page 115 |
Enables/disables Spanning Tree | Page 115 |
Protocol (STP). |
|
Sets the STP Bridge priority level. | Page 115 |
Enables or disables autopartitioning for | Page 116 |
switches in a stack. |
|
Enters a license number for the stack. | Page 116 |
Defines the PPP authentication method. | Page 117 |
Sets the time after which the system | Page 117 |
automatically disconnects an idle PPP |
|
incoming session. |
|
Sets the baud rate used in PPP sessions. | Page 117 |
Sets the location (URL/directory) of the | Page 118 |
P330 Device Manager Help files. |
|
Enables or disables the IP multicast | Page 118 |
filtering application. |
|
Sets the aging time for client ports. | Page 118 |
90 | Avaya P332MF User’s Guide |