Avaya P332MF manual Off

Chapter 3 Avaya P332MF Front and Back Panels

Table 3.1	Avaya P332MF LED Descriptions
LED Name		Description		LED Status
COL		Collision		OFF – No collision or FDX port
				ON – Collision occurred on line
				OFF – No transmit activity
Tx		Transmit to line
				ON – Data transmitted on line from the
				module
				OFF – No receive activity
Rx		Receive from line
				ON – Data received from the line into the
				module
FDX		Half/Full Duplex		OFF – Half duplex mode
				ON – Full duplex mode
				OFF – No Flow Control
FC		Flow Control		ON – Symmetric/Asymmetric Flow Control
				mode is enabled and port is in full duplex
				mode.
Hspd		High Speed			10/100	1000
				OFF:	10	N/A
				ON:	100	1000
LAG		Link Aggregation		OFF – No LAG defined for this port
		Group (Trunking)		ON – Port belongs to a LAG
Table 3.2	Avaya P330 <- -> Select buttons
Description			Function
Left/Right			Individual – select LED function (see table above).
Reset module			Press both right and left buttons together for approximately two
			seconds. All LEDs on module light up until buttons are
			released.
Reset stack			Press both right and left buttons together for 4 seconds. All
			LEDs on stack light up until buttons are released.
FIV			Force Initial Version – boot from backup initial version of the
			Avaya P330 software, from Bank A (see Note below).

10 Avaya P332MF User’s Guide