Avaya P332MF manual Copy tftp stack-config filename ip, Copy tftp module-config

Chapter 6 CLI – Layer 2

For more information , use 'show tftp upload status' command

********************************************************************

*If you are currently running the P330 Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

copy tftp stack-config

Use the copy tftp stack-configcommand to download the stack-level configuration from a saved file into the current NVRAM running configuration, via TFTP. To use this command, you need to have an active tftp server, and to create a file into which to download the data. If Avaya Multi-Service Network Manager is running, an additional TFTP server is not required.

Note: You should perform the nvram initialize command prior to the copy tftp operation.

The syntax for this command is:

copy tftp stack-config <filename> <ip>

filename	The file name (full path)
ip	The IP address of the TFTP server

Example:

P330-N# copy tftp stack-config c:\config\switch1.cfg 192.168.49.10

copy tftp module-config

Use the copy tftp module-configcommand to download the switch-level configuration from a saved file into the current NVRAM running configuration of a switch, via TFTP. To use this command, you need to have an active tftp server, and to create a file into which to download the data. If Avaya Multi-Service Network Manager is running, an additional tftp server is not required.

Note: You should perform the nvram initialize command prior to the copy tftp operation.

130 Avaya P332MF User’s Guide