Avaya P332MF manual Set port security, Set cascadingupdownfault-monitoring enabledisable

Chapter 6 CLI – Layer 2

set port security

Use the set port security command to enable MAC security on a port or a range of ports at the module level. The port security is activated only after you enable the secutity mode at the stack level using the set security mode command.

Note: This command is not supported in P332G-ML and P332GT-ML switches. This command is used to set port security for ports in other P330 switches in the stack.

The syntax for this command is:

set port security { enable disable } [<module>[/<port>]]

enable disable	Set the port security enable or disable
module/port	The switch number/the port number

Output Example:

P330-N> set port security enable 1/2

Port 1/2 secured.

set cascading

Use the set cascading command to enable or disable fault-trap sending for unconnected cascading links. The default setting is disable.

The syntax for this command is:

set cascading{updown}fault-monitoring {enabledisable}

<mod-num>

Output Example:

P330-N# set cascading down fault-monitoring enable 1

Module 1 cascading-down fault monitoring enabled.

set inband vlan

Use the set inband vlan command to set a value for the management vlan (from 1 to 3071).

Avaya P332MF User’s Guide 111