|
|
| Chapter 6 | CLI – Layer 2 |
|
|
|
|
|
This operation | may take | a few | minutes... |
|
Please refrain | from any | other | operation during this time. |
|
For more information , use 'upload status' command
********************************************************************
*If you are currently running the P330 Device Manager application,*
*it is recommended to exit from it before performing configuration*
* download operations.*
********************************************************************
copy module-config tftp
Use the copy
If an error occurred during upload (you can check this using the command show tftp upload status) you must fix the problem. The following is a list of possible problems:
aYou did not create an empty text file at the destination server (0 Bytes).
bYou do not have the correct path to the file.
cThe destination server is not active/on.
dThe destination server is unreachable.
Then, perform the upload procedure again twice as follows:
aDelete the destination file and recreate a correctly named empty file at the destination server (0 Bytes)
bType the command copy
cDelete the destination file and recreate a correctly named empty file at the destination server (0 Bytes)
dType the command copy
The syntax for this command is:
copy
filename | The file name (full path) |
ip | The IP address of the TFTP server |
The switch number |
Output Example:
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
Avaya P332MF User’s Guide | 129 |