Avaya P332MF manual Show logout, Show interface, Show device-mode

Chapter 6 CLI – Layer 2

The syntax for this command is:

show logout

Output Example:

P330-N> show logout

CLI timeout is 10 minutes

show interface

Use the show interface command to display information on network interfaces.

The syntax for this command is:

show interface

Output Example:

To display the interface:

P330-N> show interface
Interface Name	VLAN	IP address	Netmask
--------------	----	---------------	---------------
inband	1	10.0.0.1	255.255.255.0
ppp disable	1	0.0.0.0	0.0.0.0

show device-mode

Use the show device-modecommand to show the P332G-ML/P332GT-ML/ P333R/P333R-LB operating mode you are currently in. Possible modes are Router, or Switch.

Note: This command is not supported by the P333T/P334T/P332MF/P333T-PWR switches which do not have Router mode.

The syntax for this command is:

show device-mode

Avaya P332MF User’s Guide 49