Avaya P332MF manual Set timezone, Set time protocol

Chapter 6 CLI – Layer 2

automatically:

P330-N# set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.

Output Example:

To disable the automatic disconnection of idle sessions:

P330-N# set logout 0

Sessions will not be automatically logged out.

set timezone

Use the set timezone command to assign a timezone name and set the time difference of your P330 relative to the Coordinated Universal Time (UTC/GMT). The minutes parameter can only be set to 30.

The syntax for this command is:

set timezone <zone_name> <hours hours:min>

Output Example:

set timezone GMT -3:30

Timezone set to 'GMT', offset from UTC is -3:30 hours

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

set time protocol

Use the set time protocol command to set the protocol for use in the system as either SNTP protocol or TIME protocol.

The syntax for this command is:

set time protocol [sntp-protocoltime-protocol]

Output Example:

P330-N# set time protocol sntp-protocol

The protocol has been set to SNTP protocol

Output Example:

P330-N# set time protocol time-protocol

92 Avaya P332MF User’s Guide