
Chapter 6 | CLI – Layer 2 |
|
|
show ip route
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Output Example:
Destination Gateway
149.49.1.1172.20.22.201
190.20.0.0172.20.22.202
172.20.0.0172.20.22.96
show image version
Use the show image version command to display the software version of the image on both memory banks of a specified switch.
The syntax for this command is:
show image version [<mod_num>]
If no switch number is specified, the image version of the all switches will be displayed.
Output Example:
P330-N> show image version 1
Mod | Bank | Version | |
1 | A | 3.3.14 | |
1 | B | 3.5.19 |
46 | Avaya P332MF User’s Guide |