3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A manual Setting Timeout for an Authorization Server

Managing Other Timers 539

Setting the 802.1X

Timeout for an

Authorization Server

Type the following command to reset the 802.1X quiet period to the default:

WX1200# clear dot1x quiet-period success: change accepted.

Use this command to configure the number of seconds before the WX switch times out a request to a RADIUS authorization server.

set dot1x timeout auth-server seconds

The default is 30 seconds. The range is from 1 to 65,535 seconds.

For example, type the following command to set the authorization server timeout to 60 seconds:

WX1200# set dot1x timeout auth-server 60 success: dot1x auth-server timeout set to 60.

To reset the 802.1X authorization server timeout to the default, type the following command:

WX1200# clear dot1x timeout auth-server success: change accepted.

Setting the 802.1X Use the following command to set the number of seconds before the WX Timeout for a Client switch times out an authentication session with a supplicant (client):

set dot1x timeout supplicant seconds

The default is 30 seconds. The range of time is from 1 to 65,535 seconds.

For example, type the following command to set the number of seconds for a timeout to 300:

WX1200# set dot1x timeout supplicant 300 success: dot1x supplicant timeout set to 300.

Type the following command to reset the timeout period:

WX1200# clear dot1x timeout supplicant success: change accepted.