3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A manual Set radio-profile name service-profile name

Configuring WPA 295

Assigning the Service Profile to Radios and Enabling the Radios

After you configure WPA settings in a service profile, you can map the service profile to a radio profile, assign the radio profile to radios, and enable the radios to activate the settings.

To map a service profile to a radio profile, use the following command:

set radio-profile name service-profile name

To assign a radio profile to radios and enable the radios, use the following command:

set ap port-listradio {1 2} radio-profile name mode {enable disable}

To map service profile wpa to radio profile bldg1, type the following command:

WX1200# set radio-profile blgd1 service-profile wpa success: change accepted.

To assign radio profile bldg1 to radio 1 on ports 1-3, and 5 and enable the radios, type the following command:

WX1200# set ap 1-3,5 radio 1 radio-profile bldg1 mode enable success: change accepted.

To assign radio profile bldg1 to radio 2 on ports 1-2 and port 6 and enable the radios, type the following command:

WX1200# set ap 1-2,6 radio 2 radio-profile bldg1 mode enable success: change accepted.