3Com WX1200 3CRWX120695A, WXR100 3CRWXR10095A Filter-id inboundacl.in, Filter-id outboundacl.out

654CHAPTER C: SUPPORTED RADIUS ATTRIBUTES

Table 55 801.1X Attributes (continued)

		Rcv in	Sent in	Sent in
		Access	Access	Acct
Attribute	Type	Resp?	Reqst?	Reqst?	Description
Filter-Id	11	Yes	No	Optional	If configured in the WX
					switch’s local database,
					this attribute can be an
					access control list (ACL) to
					filter outbound or inbound
					traffic. Use the following
					format:
					filter-id inboundacl.in
					or
					filter-id outboundacl.out
					If you are configuring the
					attribute on a RADIUS
					server, the value field of
					filter-id can specify up to
					two ACLs. Any of the
					following are valid:
					filter-id =
					"Profile=acl1"
					filter-id =
					"OutboundACL=acl2"
					filter-id = "Profile=acl1
					OutboundACL=acl2"
					(Each example goes on a
					single line on the server.)
					The format in which to
					specify the values depends
					on the RADIUS server.
					Regardless of whether the
					attributes are defined
					locally or on a RADIUS
					server, the ACLs must
					already be configured on
					the WX switch.
					(For details, see
					Chapter 19, “Configuring
					and Managing Security
					ACLs,” on page 377.)