3Com WX4400 3CRWX440095A manual Display ap acl hits ap-number, WX# display ap acl hits

			Displaying MAP Information 265
	4 green	local	1	4
5	yellow	tunnel	radio_1	23
			wx_tun	5
			radio_1	24

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

Displaying ACL When a MAP is configured to perform local switching, you can display Information for a the number of packets filtered by security ACLs (“hits”) on the MAP.

MAP Each time a packet is filtered by a security ACL, the MAP’s ACL hit counter increments. To display ACL hits for a MAP, use the following command:

display ap acl hits ap-number

For MSS to count hits for a security ACL, you must specify hits in the set security acl commands that define ACE rules for the ACL.

The following command displays the security ACL hits on MAP 7,

WX# display ap acl hits 7
ACL hit-counters for AP 7		ACL-name
Index Counter
----- --------------------		--------
1	0	acl_2
2	0	acl_175
3	916	acl_123

To display a summary of the security ACLs that are mapped on a MAP, use the following command:

display ap acl map ap-number

This command lists only the ACLs that have been mapped on the specified MAP. To list all committed ACLs, use the display security acl info command. To list ACLs that have not yet been committed, use the display security acl editbuffer command.