3Com WXR100 3CRWXR10095A, WX4400 3CRWX440095A, WX1200 3CRWX120695A Set service-profile cac-mode

See the following:

„ “Static CoS” on page 341

„ “Configuring Static CoS” on page 343

set service-profileuse-client-dscp

See “Using the Client’s DSCP Value to Classify QoS Level” on page 344.

328CHAPTER 16: CONFIGURING QUALITY OF SERVICE

Table 26 QoS Parameters (continued)

QoS Feature Description Configuration Command

QoS parameters configured in service profiles

CAC mode	Call Admission Control, which
	regulates addition of new VoIP
	sessions on MAP radios. One of
	the following modes can be
	enabled:
	„	None (the default)
	„	Session-based

set service-profile cac-mode

See the following:

„“Call Admission Control” on page 340

„“Configuring Call Admission Control” on page 343

Static CoS Simple CoS assignment. When set service-profilestatic-cos

enabled, static CoS assigns the set service-profile cos same CoS value to all traffic on the

service profile’s SSID. Static CoS is disabled by default.

The default static CoS value is 0.

Using client DSCP Whether MSS classifies the QoS

valuelevel of IP packets based on their DSCP value, instead of their 802.11 priority.