3Com WX2200 3CRWX220095A manual Enabling CAC, Changing the Maximum Number of Active Sessions

Changing QoS Settings 343

Configuring Call To configure CAC for an SSID, enable the feature on the SSID’s service Admission Control profile. When enabled, CAC limits the number of active sessions a radio

can have to 14 by default. You can change the maximum number of sessions to a value from 0 to 100.

Enabling CAC

To enable or disable CAC on a service profile, use the following command:

set service-profile name cac-mode {none session}

For example, to enable session-based CAC on service profile sp1, use the following command:

WX1200# set service-profile sp1 cac-mode session success: change accepted.

Changing the Maximum Number of Active Sessions

When CAC is enabled, the maximum number of active sessions a radio can have is 14 by default. To change the maximum number of sessions, use the following command:

set service-profile name cac-session max-sessions

The max-sessionscan be a value from 0 to 100.

For example, to change the maximum number of sessions for radios used by service profile sp1 to 10, use the following command:

WX1200# set service-profile sp1 cac-session 10 success: change accepted.

Configuring Static To configure static CoS for an SSID, enable the feature and set the CoS CoS value. MAP radios that forward traffic for the SSID mark all the traffic

with the static CoS value and use the corresponding forwarding queue to forward the traffic. The static CoS value applies to all traffic on the SSID.

To enable static CoS and set the CoS value, use the following commands:

set service-profile name static-cos {enable disable} set service-profile name cos level

The level can be a value from 0 (lowest priority) to 7 (highest priority). The default is 0.