3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A manual Displayed, they must

Supported Standard and Extended Attributes 655

Table 55 801.1X Attributes (continued)

		Rcv in	Sent in	Sent in
		Access	Access	Acct
Attribute	Type	Resp?	Reqst?	Reqst?	Description
Reply-	18	Yes	No	No	String. Text that can be
Message					displayed to the user.
					Multiple Reply-Messages
					can be included. If any are
					displayed, they must
					appear in the order in
					which they appear in the
					packet.
State	24	Yes	Yes	No	Can be sent by a RADIUS
					server in an
					Access-Challenge message
					to the WX switch. If the
					WX receives an
					Access-Challenge with this
					attribute, it returns the
					same State value in an
					Access-Request response
					to the RADIUS server,
					when a response is
					required. (For details, see
					RFC 2865.)
Class	25	Yes	No	Yes	If received, this
					information must be sent
					on, without interpretation,
					in all subsequent packets
					sent to the RADIUS server
					for that client session.
Vendor-	26	Yes	No	Yes	String. Allows MSS to
Specific					support 3Com VSAs. (See
					Table 56 on page 659.)
Session-	27	Yes	No	Optional	Maximum number of
Timeout					seconds of service allowed
					the user before
					reauthentication of the
					session.

If the global reauthentication timeout (set by the set dot1x reauth-periodcommand) is shorter than the session-timeout, MSS uses the global timeout instead.