3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A manual Displaying Multicast Information

Displaying Multicast Information 373

Adding or Removing a Static Multicast Router Port

Adding or Removing a Static Multicast Receiver Port

To add or remove a static multicast router port, use the following command:

set igmp mrouter port port-list{enable disable}

To add a static multicast receiver port, use the following command:

set igmp receiver port port-list{enable disable}

Displaying

Multicast

Information

Displaying Multicast

Configuration

Information and

Statistics

You can use the CLI to display the following IGMP snooping information:

„Multicast configuration information and statistics

„Multicast queriers

„Multicast routers

„Multicast receivers

To display multicast configuration information and statistics, use the following command:

display igmp [vlan vlan-id]

The display igmp command displays the IGMP snooping state, the settings of all multicast parameters you can configure, and multicast statistics.

To display multicast information for VLAN orange, type the following command:

WX1200# display igmp vlan orange

VLAN: orange

IGMP is enabled Proxy reporting is on Mrouter solicitation is on Querier functionality is off

Configuration values: qi: 125 oqi: 300 qri: 100 lmqi: 10 rvalue: 2 Multicast

router information:		Type	TTL
Port	Mrouter-IPaddr Mrouter-MAC
----	--------------- -----------------	-----	-----
1	192.28.7.5 00:01:02:03:04:05	dvmrp	17

Group	Port	Receiver-IP	Receiver-MAC	TTL
---------------	----	---------------	-----------------	-----
224.0.0.2	none	none	none	undef
237.255.255.255	5	10.10.10.11	00:02:04:06:08:0b	258