3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A manual Single-Switch Deployment

CLI quickstart Command 47

If you configure time and date parameters, you will be required to enter a name for the timezone, and then enter the value of the timezone (the offset from UTC) separately. You can use a string of up to 32 alphabetic characters as the timezone name.

Figure 2 shows an example. Users bob and alice can access encrypted SSID corporate on either of the MAPs. Users user1 and user2 can use the same MAPs to access unencrypted SSID public. Although the same hardware supports both SSIDs and sets of users, AAA ensures that only the users who are authorized to access an SSID can access that SSID. Users of separate SSIDs can even be in the same VLAN, as they are in this example.

Figure 2 Single-Switch Deployment

WX1200-20-Corp

10.10.10.4

Console

Port	Port
2	3

alice

user1user2

BackboneInternet

Corporate resources

bob

WXR100-aabbcc# quickstart

This will erase any existing config. Continue? [n]: y Answer the following questions. Enter '?' for help. ^C to break out

System Name [WXR100]: WXR100-mrktg

Country Code [US]: US

System IP address []: 172.16.0.21

System IP address netmask []: 255.255.255.0

Default route []: 172.16.0.21

Do you need to use 802.1Q tagged default VLAN [Y/N]? Y: y Specify the port number that needs to be tagged [1-2, <CR> ends config]: 2

Specify the tagged value for port [2] [<CR> ends config:] 100