3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A Displaying the AAA, Saving, WX nonvolatile memory

Displaying the AAA Configuration 61

Displaying the AAA	To display your AAA configuration, type the following command:
Configuration
WX1200# display aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers	Addr	Ports		T/o Tries Dead State
Server
-------------------------------------------------------------------
r1	192.168.253.1	1812	1813	5	3	0	UP
Server groups
sg1: r1

set authentication console * local set authentication admin * local

set accounting admin Geetha stop-only local set accounting admin * start-stop local user Geetha

Password = 1214253d1d19 (encrypted)

(For information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

Saving the	You must save the configuration for all commands that you enter and
Configuration	want to use for future sessions. After you enter the administrator’s AAA
	configuration, type the following command to maintain these commands
	in WX nonvolatile memory:
	WX1200# save config
	success: configuration saved.
	You can also specify a filename for the configuration—for example,
	configday. To do this, type the following command:
	WX1200# save config configday
	Configuration saved to configday.
	You must type the save config command to save all configuration
	changes since the last time you rebooted the WX switch or saved the
	configuration. If the WX switch is rebooted before you have saved the
	configuration, all changes are lost.
	You can also type the load config command, which reloads the WX switch
	to the last saved configuration or loads a particular configuration filename.
	(For more information, see “Managing Configuration Files” on page 609.)