258CHAPTER 10: CONFIGURING MAP ACCESS POINTS

Displaying a List of

Distributed MAPs

that Are Not

Configured

This command indicates that the Mobility Domain contains four Distributed MAPs, with serial IDs M9DE48B012F00, M9DE48B123400, M9DE48B123600, and M9DE48B123700. Each MAP is configured on two WX switches, with system IP addresses 10.3.8.111 and 10.4.3.2. The bias for the MAP on each WX is listed. Normally, a Distributed MAP boots from the WX with the high bias for the MAP. (For more information, see “Resiliency and Dual-Homing Options for MAPs” on page 184 and “Boot Process for Distributed MAPs” on page 189.)

The AP field indicates the connection number of each MAP on the WX on which the command is typed. A hyphen ( - ) in the DAP field indicates that the MAP is configured on another WX in the same Mobility Domain.

To display a list on Distributed MAPs that are not configured, use the following command:

display ap unconfigured

The following command displays information for two Distributed MAPs that are not configured:

WX1200# display ap unconfigured

 

 

Total number of entries: 2

Port

Vlan

Serial Id

Model

IP Address

-----------

------

---------------

----

--------

0333001287

MP-101

10.3.8.54

5

default

M9DE48B012F00

AP2750

10.3.8.57

6

vlan-eng

Displaying Active

A Distributed MAP can have only one active data connection. To display

Connection

the system IP address of the WX that has the active connection (the

Information for

switch that booted the MAP), use the following command:

Distributed MAPs

display ap connection [apnumber serial-id serial-ID]

 

 

The serial-idparameter displays the active connection for a Distributed

 

MAP even if that MAP is not configured on this WX. However, if you use

 

the command with the apnumber parameter or without a parameter,

 

connection information is displayed only for Distributed MAPs that are

 

configured on this WX.

 

This command provides information only if the Distributed MAP is

 

configured on the WX where you use the command.

Page 257 Page 259
Page 258
Image 258
3Com WX1200 3CRWX120695A manual Displaying a List Distributed MAPs That Are Not Configured, Connection, Information for
Page 257 Page 259

WX1200 3CRWX120695A, WX4400 3CRWX440095A, WXR100 3CRWXR10095A, WX2200 3CRWX220095A specifications

The 3Com WX2200 (3CRWX220095A), WX4400 (3CRWX440095A), WX1200 (3CRWX120695A), and WXR100 (3CRWXR10095A) are part of a robust suite of wireless networking solutions offered by 3Com, designed to meet the needs of modern enterprise environments. These devices provide reliable connectivity, flexibility, and scalability, making them ideal for businesses of all sizes.

The 3Com WX2200 is a high-performance wireless switch that supports up to 64 access points, making it suitable for medium to large deployments. It boasts advanced features such as dynamic RF management, which optimizes channel selection and power levels based on real-time network conditions. This ensures maximum coverage and minimizes interference, leading to improved user experiences. Additionally, it supports dual-band operation and can seamlessly integrate with various wireless access points, providing enhanced throughput and robust performance.

The WX4400 is designed for high-density environments and offers extensive scalability. It supports up to 128 access points and is equipped with advanced security features, including WPA2 enterprise encryption and role-based access control. This switch also features intelligent load balancing, allowing it to dynamically distribute user traffic across available access points, thus enhancing overall network efficiency.

The WX1200, positioned as an entry-level solution, is well-suited for small to medium-sized businesses. It offers a user-friendly management interface, allowing IT staff to quickly configure and monitor the network. This device supports a variety of deployment scenarios and can be easily integrated into existing infrastructure. It also comes equipped with essential security features to protect the network from unauthorized access.

The WXR100 complements the series by providing simplified management for access points, ensuring that businesses can easily deploy and maintain their wireless networks. It supports various management protocols and integrates with a variety of third-party systems, enhancing inter-operability. With Power over Ethernet (PoE) support, the WXR100 can deliver power to connected access points, reducing the complexity and costs associated with additional power infrastructure.

Together, these solutions embody 3Com's commitment to delivering high-quality networking products that enhance connectivity and performance. With features such as scalability, advanced security, dynamic load balancing, and centralized management, the WX2200, WX4400, WX1200, and WXR100 form a comprehensive wireless networking ecosystem tailored for today’s enterprise challenges.
Top Page Image Contents