3Com WX4400 3CRWX440095A manual Information Displaying the Size of the Forwarding Database

	Managing the Layer 2 Forwarding Database 97
Displaying	You can display the forwarding database size and the entries contained in
Forwarding Database	the database.
Information	Displaying the Size of the Forwarding Database
	To display the number of entries contained in the forwarding database,
	use the following command:
	display fdb count {perm static dynamic} [vlan vlan-id]
	For example, to display the number of dynamic entries that the
	forwarding database contains, type the following command:
	WX1200# display fdb count dynamic
	Total Matching Entries = 2
	Displaying Forwarding Database Entries
	To display the entries in the forwarding database, use either of the
	following commands:
	display fdb [mac-addr-glob [vlan vlan-id]]
	display fdb {perm static dynamic system all}
	[port port-list vlan vlan-id]
	The mac-addr-globparameter can be an individual address, or a portion
	of an address with the asterisk (*) wildcard character representing from 1
	to 5 bytes. The wildcard allows the parameter to indicate a list of MAC
	addresses that match all the characters except the asterisk.
	Use a colon between each byte in the address (for example,
	11:22:33:aa:bb:cc or 11:22:33:*). You can enter the asterisk (*) at the
	beginning or end of the address as a wildcard, on any byte boundary.

To display all entries in the forwarding database, type the following command:

WX1200# display fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.					[Protocol Type]
VLAN	TAG	Dest MAC/Route Des [CoS]		Destination Ports
----	----	------------------ -----		-----------------------------------------
1		00:01:97:13:0b:1f	*	1	[ALL]
1		aa:bb:cc:dd:ee:ff		3	[ALL]
1		00:0b:0e:02:76:f5		1	[ALL]

Total Matching FDB Entries Displayed = 3