Web Quick Start (WXR100, WX1200 and WX2200 Only) 41

Web Quick Start Requirements

To use the Web Quick Start, you need the following:

„AC power source for the switch

„PC with an Ethernet port that you can connect directly to the switch

„Category 5 (Cat 5) or higher Ethernet cable

If the PC is connected to the network, power down the PC or disable its network interface card (NIC), then unplug the PC from the network.

You can use a Layer 2 device between the switch and the PC. However, do not attach the switch to your network yet. The switch requires the PC you attach to it for configuration to be in the 192.168.100.x subnet, and uses the MSS DHCP server to assign the PC an address from this subnet. If you attach the unconfigured switch to your network, the switch disables the MSS DHCP server, if the switch detects another DHCP server on the network. If the network does not have a DCHP server, the switch’s DHCP server remains enabled and will offer IP addresses in the 192.168.100.x subnet in response to DHCP Requests.

Accessing the Web To access the Web Quick Start:

Quick Start

1Use a Category 5 (Cat 5) or higher Ethernet cable to connect the switch directly to a PC that has a web browser.

2Connect the switch to an AC power source.

If the green power LED is lit, the switch is receiving power.

If you are configuring a WXR100, do not press the factory reset switch during power on. Pressing this switch on an unconfigured switch causes the switch to attempt to contact a 3Com Wireless Switch Manager server instead of displaying the Web Quick Start. (Other switch models also have reset switches, but the reset switch simply restarts these other models without clearing the configuration.)

3Enable the PC’s NIC that is connected to the switch, if not already enabled.

4Verify that the NIC is configured to use DHCP to obtain its IP address.

You will not be able to access the Web Quick Start if the IP address of the NIC is statically configured.

5Use a web browser to access IP address 192.168.100.1.

Page 40 Page 42
Page 41
Image 41
3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A, WX1200 3CRWX120695A manual Accessing the Web To access the Web Quick Start
Page 40 Page 42

WX1200 3CRWX120695A, WX4400 3CRWX440095A, WXR100 3CRWXR10095A, WX2200 3CRWX220095A specifications

The 3Com WX2200 (3CRWX220095A), WX4400 (3CRWX440095A), WX1200 (3CRWX120695A), and WXR100 (3CRWXR10095A) are part of a robust suite of wireless networking solutions offered by 3Com, designed to meet the needs of modern enterprise environments. These devices provide reliable connectivity, flexibility, and scalability, making them ideal for businesses of all sizes.

The 3Com WX2200 is a high-performance wireless switch that supports up to 64 access points, making it suitable for medium to large deployments. It boasts advanced features such as dynamic RF management, which optimizes channel selection and power levels based on real-time network conditions. This ensures maximum coverage and minimizes interference, leading to improved user experiences. Additionally, it supports dual-band operation and can seamlessly integrate with various wireless access points, providing enhanced throughput and robust performance.

The WX4400 is designed for high-density environments and offers extensive scalability. It supports up to 128 access points and is equipped with advanced security features, including WPA2 enterprise encryption and role-based access control. This switch also features intelligent load balancing, allowing it to dynamically distribute user traffic across available access points, thus enhancing overall network efficiency.

The WX1200, positioned as an entry-level solution, is well-suited for small to medium-sized businesses. It offers a user-friendly management interface, allowing IT staff to quickly configure and monitor the network. This device supports a variety of deployment scenarios and can be easily integrated into existing infrastructure. It also comes equipped with essential security features to protect the network from unauthorized access.

The WXR100 complements the series by providing simplified management for access points, ensuring that businesses can easily deploy and maintain their wireless networks. It supports various management protocols and integrates with a variety of third-party systems, enhancing inter-operability. With Power over Ethernet (PoE) support, the WXR100 can deliver power to connected access points, reducing the complexity and costs associated with additional power infrastructure.

Together, these solutions embody 3Com's commitment to delivering high-quality networking products that enhance connectivity and performance. With features such as scalability, advanced security, dynamic load balancing, and centralized management, the WX2200, WX4400, WX1200, and WXR100 form a comprehensive wireless networking ecosystem tailored for today’s enterprise challenges.
Top Page Image Contents