3Com WX2200 3CRWX220095A, WXR100 3CRWXR10095A, WX4400 3CRWX440095A, WX1200 3CRWX120695A Configuring

		Configuring Accounting for Administrative Users 59
	Although MSS allows you to configure a user password for the special
	“last-resort” guest user, the password has no effect. Last-resort users can
	never access a WX in administrative mode and never require a password.
Adding and Clearing	Usernames and passwords can be stored locally on the WX switch. 3Com
Local Users for	recommends that you enforce console authentication after the initial
Administrative Access	configuration to prevent anyone with unauthorized access to the console
	from logging in. The local database on the WX switch is the simplest way
	to store user information in a 3Com system.
	To configure a user in the local database, type the following command:
	set user username password [encrypted] password
	For example, to configure user Jose with the password spRin9 in the local
	database on the WX switch, type the following command:
	WX1200# set user Jose password spRin9
	success: User Jose created
	To clear a user from the local database, type the following command:
	clear user username
Configuring	Accounting allows you to track network resources. Accounting records
Accounting for	can be updated for three important events: when the user is first
Administrative	connected, when the user roams from one MAP to another, and when
Users	the user terminates his or her session. The default for accounting is off.
	To configure accounting for administrative logins, use the following
	command:
	set accounting {admin console} {user-glob}
	{start-stop	stop-only}method1 [method2] [method3]
	[method4]
	set accounting {admin console} {user-glob}
	{start-stop	stop-only}method1 [method2] [method3]
	[method4]

To configure accounting for administrative logins over the network at

EXAMPLE, enter the following command:

set accounting admin EXAMPLE\*

{start-stop stop-only}aaa-method