Sun Microsystems 4.5 manual Configuring Integrated Mode Operation, Add Applications to Start Menu

Setting	Description
Check for Local X Server	If enabled, the SGD Client checks whether there is an X server running on the
	computer.
	Enabling this option can improve performance when launching X applications
	that are configured to display using an X server on the computer.
	This setting only applies to Windows computers.
	This setting is disabled by default.
Proxy Settings	Settings that control how the SGD Client determines what proxy servers to
	use.
	Use Default Web Browser Settings means use the proxy server settings
	configured in your default browser.
	Manual Proxy Settings enable you to define the proxy server settings in the
	profile. You can specify an Hypertext Transfer Protocol (HTTP) proxy server.
	If the proxy settings are determined from a browser, the settings are stored
	and used the next time the SGD Client starts.
	If Establish Proxy Settings on Session Start is enabled, the SGD Client obtains
	the proxy settings from the browser every time it starts. The stored proxy
	settings are not used. If Automatic Client Login is selected, the Establish
	Proxy Settings on Session Start setting is not available.
	By default, the Use Default Web Browser Settings check box is selected and
	the Establish Proxy Settings on Session Start check box is not selected.
Connection Failure	Settings that control what the SGD Client does if the connection to an SGD
	server is lost: Whether to always reconnect, to never reconnect or to ask you
	what to do.
	If the SGD Client reconnects, these settings control how many attempts are
	made to reconnect and the time in seconds between each attempt.
	If the SGD Client is unable to reconnect, the webtop session ends and any
	running applications are ended or suspended, depending on how they have
	been configured for you.
	The default settings are: Always Attempt to Reconnect, Number of Attempts:
	6, and Interval: 10.

Configuring Integrated Mode Operation

The following settings on the Client Settings tab are used for configuring Integrated mode operation of SGD:

■Connect on System Login

■Automatic Client Login

■Add Applications to Start Menu

See “Using SGD From Your Desktop Start or Launch Menu” on page 23 for more information.

Appendix C Profile Settings 41