3Com WXR100 3CRWXR10095A manual Displaying Clearing Network Sessions, Display sessions network

560CHAPTER 25: MANAGING SESSIONS

Displaying and

Clearing Network

Sessions

Use the following command to display information about network sessions:

display sessions network

[user user-glob mac-addrmac-addr-glob ssid ssid-name vlan vlan-glob session-idsession-id wired] [verbose]

In most cases, you can display both summary and detailed (verbose) information for a session. For example, the following command displays summary information about all current network sessions:

WX1200# display sessions network		IP or MAC	VLAN	Port/
User	Sess
Name	ID	Address	Name	Radio
EXAMPLE\wong------------------------------	----	-----------------	--------------- -----
	5*	192.168.12.100	vlan-eng	3/1
jose@example.com	5125*	192.168.12.141	vlan-eng	1/1
00:30:65:16:8d:69	4385*	192.168.19.199	vlan-wep	3/1
	761	00:0b:be:15:46:56	(none)	1/2
5 sessions total	763	00:02:2d:02:10:f5	(none)	1/1

An asterisk (*) in the Sess ID field indicates a session that is currently active. (For more information about the fields in the output, see the Wireless LAN Switch and Controller Command Reference.)

(For information about getting detailed output, see “Displaying Verbose Network Session Information” on page 561.)

You can display and clear network sessions in the following ways:

„By the name of the user. (See “Displaying and Clearing Network Sessions by Username” on page 562.)

„By the MAC address of the user. (See “Displaying and Clearing Network Sessions by MAC Address” on page 563.)

„By the name of the VLAN to which the user belongs. (See “Displaying and Clearing Network Sessions by VLAN Name” on page 563.)

„By the local session ID. (See “Displaying and Clearing Network Sessions by Session ID” on page 564.)

Authorization attribute values can be changed during authorization. If the values are changed, display sessions output shows the values that are actually in effect following any changes.