3Com WX4400 3CRWX440095A manual Displaying the Time Zone, Clearing the Time Zone, That you set

Configuring and Managing Time Parameters 125

Setting the Time The time zone parameter adjusts the system date, and optionally the Zone time, by applying an offset to UTC.

To set the time zone, use the following command:

set timezone zone-name {-hours [minutes]}

The zone name can be up to 32 alphanumeric characters long, with no spaces. The hours parameter specifies the number of hours to add to or subtract from UTC. Use a minus sign (-) in front of the hour value to subtract the hours from UTC.

To set the time zone to PST (Pacific Standard Time), type the following command:

WX1200# set timezone PST -8

Timezone is set to 'PST', offset from UTC is -8:0 hours.

Displaying the Time Zone

To display the time zone, use the following command:

display timezone

For example, to display the time zone, type the following command:

WX1200# display timezone

Timezone set to 'PST', offset from UTC is -8 hours

Clearing the Time Zone

To clear the time zone, use the following command:

clear timezone

Configuring the The summertime period offsets the system time +1 hour and returns it to Summertime Period standard time for daylight savings time or a similar summertime period

that you set.

Configure summertime before you set the time and date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is within the summertime period.

To configure the summertime period, use the following command:

set summertime summer-name

[start week weekday month hour min end week weekday month hour min]