3Com WXR100 3CRWXR10095A Specifying the External Antenna Model, MP-620 External Antenna Models

248CHAPTER 10: CONFIGURING MAP ACCESS POINTS

Table 21 lists the external antenna models you can use with these MAPs.

Table 21 MP-341, MP-352, MP-262 External Antenna Models

		Beamwidth
Model	Type	Horizontal	Vertical
ANT-5060	802.11a	60°	14°
(ASTN6S)*
ANT-5120	802.11a	120°	14°
(ASTN6T)
ANT-5180	802.11a	180°	14°
(ASTN6H)
ANT1060	802.11b/g	60°	65°
ANT1120	802.11b/g	120°	60°
ANT1180	802.11b/g	180°	40°

Table 22 lists the external antenna models you can use with the MP-620.

Table 22 MP-620 External Antenna Models

	Radio		Beamwidth
Model	Type	Gain (dBi)	Horizontal	Vertical
ANT-1360-OUT	802.11b/g	8	360°	15°
(WA6202-ANT-8G)*
ANT-5360-OUT	802.11a	8	360°	12°
(WA5201M-ANT-8A-1)
ANT-5060-OUT	802.11a	17	60°	6°
(WA5201M-ANT-17A)
ANT-5120-OUT	802.11a	14	120°	6°
(WA5201M-ANT-14A)

*The numbers in parentheses are the numbers that appear on the antennas. The numbers beginning ANT are the part numbers and are the numbers you specify when configuring the MAP. To verify an external antenna’s model number, look for the number in parentheses.

Specifying the External Antenna Model

To specify the external antenna model, use the following command:

set ap apnumber radio {1 2} antennatype {ANT1060 ANT1120 ANT1180

ANT5060 ANT5120 ANT5180 ANT7360

ANT-1360-OUT ANT-5360-OUT ANT-5060-OUT ANT-5120-OUT ANT-7360-OUT internal}