3Com WXR100 3CRWXR10095A Matching Order for Globs, WX1200# set port enable, WX1200# reset port

32CHAPTER 1: USING THE COMMAND-LINE INTERFACE

To match all VLANs, use the double-asterisk (**) wildcard characters with no delimiters. To match any number of characters up to, but not including, a delimiter character in the glob, use the single-asterisk (*) wildcard. Valid VLAN glob delimiter characters are the at (@) sign and the period (.).

For example, the VLAN glob bldg4.* matches bldg4.security and bldg4.hr and all other VLAN names with bldg4. at the beginning.

Matching Order for Globs

In general, the order in which you enter AAA commands determines the order in which MSS matches the user, MAC address, or VLAN to a glob. To verify the order, view the output of the display aaa or display config command. MSS checks globs that appear higher in the list before items lower in the list and uses the first successful match.

Port Lists The physical Ethernet ports on a WX can be set for connection to MAPs, authenticated wired users, or the network backbone. You can include a single port or multiple ports in one MSS CLI command by using the appropriate list format.

The ports on a WX are numbered 1 through as high as 22, depending on the WX model. No port 0 exists on the WX. You can include a single port or multiple ports in a command that includes port port-list. Use one of the following formats for port-list:

„A single port number. For example:

WX1200# set port enable 6

„A comma-separated list of port numbers, with no spaces. For example:

WX1200# display port poe 1,2,4,6

„A hyphen-separated range of port numbers, with no spaces. For example:

WX1200# reset port 1-8

„Any combination of single numbers, lists, and ranges. Hyphens take precedence over commas. For example:

WX1200# display port status 1-3,5