3Com WX1200 3CRWX120695A, WXR100 3CRWXR10095A manual Displaying the Snoop Filters Mapped to a Radio

642CHAPTER A: TROUBLESHOOTING A WX SWITCH

The following command maps snoop filter snoop1 to radio 2 on MAP 3:

WX1200# set snoop map snoop1 ap 3 radio 2 success: change accepted.

Displaying the Snoop Filters Mapped to a Radio

To display the snoop filters that are mapped to a radio, use the following command:

display snoop map filter-name

The following command shows the mapping for snoop filter snoop1:

WX1200# display	snoop map snoop1
filter 'snoop1'	mapping
Dap: 3	Radio: 2

Displaying the Snoop Filter Mappings for All Radios

To display all snoop filter mappings, use the following command:

WX1200# display snoop

Dap:	3	Radio: 2
		snoop1
Dap:	2	snoop2
		Radio: 2
		snoop2

Removing Snoop Filter Mappings

To remove a snoop filter from a specific radio, use the following command:

clear snoop map filter-nameap apnumber radio {1 2}

The following command removes snoop filter snoop2 from radio 2 on

MAP 3:

WX1200# clear snoop map snoop2 ap 3 radio 2 success: change accepted.

To remove all snoop filter mappings from all radios, use the following command:

clear snoop map all