Sun Microsystems Virtual Tape Library manual Ilom command reference

APPENDIX E

ILOM command reference

The following table summarizes Integrated Lights Out Manager (ILOM) commands you can use to manage the service processor. For more information on ILOM commands, see the ILOM Administration Guide.

Description	Command
User Commands
Add a local user.	create /SP/users/user1 password=password
	role=administratoroperator
Delete a local user.	delete /SP/users/user1
Change a local user’s properties.	set /SP/users/user1 role=operator
Display information about all local users.	show -display [targetspropertiesall]
	-level [valueall] /SP/users
Display information about LDAP settings.	show /SP/clients/ldap
Change LDAP settings.	set /SP/clients/ldap binddn=proxyuser
	bindpw=proxyuserpassword
	defaultrole=administratoroperator
	ipaddress=ipaddress
Network and Serial Port Setting Commands

Display network configuration information.

Change network properties for the ILOM. Changing certain network properties, like the IP address, disconnects your active session.

Display information about the external serial port.

show /SP/network

set /SP/network pendingipaddress=ipaddress pendingipdiscovery=dchpstatic pendingipgateway=ipgateway pendingipnetmask=ipnetmask commitpending=true

show /SP/serial/external

Change the external serial port configuration.	set /SP/serial/external pendingspeed=integer
	commitpending=true
Display information about the serial connection	show /SP/serial/host
to the host.

96267 • G 275